ES1CL MHG Equivalent & Substitute Parts

Part Overview

The ES1CL MHG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150 V DC reverse voltage and 1 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified based on matching electrical specifications, mechanical compatibility, and packaging standards to ensure functional equivalence in circuit applications.

Substiute Parts

ES1CL MHG

Taiwan Semiconductor CorporationIn Stock: 1110ES1CL MHG Datasheet

Current PartRFQ

ES1CL RVG

Taiwan Semiconductor CorporationIn Stock: 59797ES1CL RVG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ES1CL MHG are identified through parametric equivalence. The substitution criteria are based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 1 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 150 V
• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -55°C ~ 150°C

The ES1CL RVG meets all electrical specifications and mechanical requirements for direct substitution. Both parts share identical base product number ES1C and are manufactured by Taiwan Semiconductor Corporation. The primary difference is packaging format: ES1CL MHG is supplied in standard packaging, while ES1CL RVG is supplied in Cut Tape (CT) format.

Parameter Comparison

Engineering Selection Recommendations

Both ES1CL MHG and ES1CL RVG are Active product status components manufactured by Taiwan Semiconductor Corporation with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and supply requirements rather than functional performance.

ES1CL MHG is appropriate for applications requiring standard packaging format with 1004 pieces currently in stock inventory.

ES1CL RVG is appropriate for applications requiring Cut Tape (CT) packaging format with 59700 pieces currently in stock inventory.

Both parts maintain full compliance with RoHS3 and REACH regulations. The choice between these substitutes depends on assembly process requirements, inventory availability, and packaging compatibility with automated placement equipment.

Frequently Asked Questions (FAQ)

Q: Can ES1CL RVG be used as a direct replacement for ES1CL MHG?

A: Yes. Both parts are parametrically equivalent with identical electrical specifications, reverse voltage rating, current rating, forward voltage drop, reverse recovery time, and leakage current. Both are packaged in DO-219AB Sub SMA format for surface mount applications. The only difference is the packaging format: ES1CL MHG uses standard packaging while ES1CL RVG uses Cut Tape (CT) format.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution eligibility is determined by matching the following parameters: Voltage - DC Reverse (Vr) (Max) of 150 V, Current - Average Rectified (Io) of 1 A, Voltage - Forward (Vf) (Max) @ If of 950 mV @ 1 A, Reverse Recovery Time (trr) of 35 ns, and Current - Reverse Leakage @ Vr of 5 µA @ 150 V.

Q: Are there mechanical compatibility concerns between ES1CL MHG and ES1CL RVG?

A: No. Both parts use identical DO-219AB package / case specifications and Sub SMA supplier device package format. Both are surface mount components with the same physical footprint and mounting requirements.

Q: What is the difference between the packaging formats?

A: ES1CL MHG is supplied in standard packaging format, while ES1CL RVG is supplied in Cut Tape (CT) format. Cut Tape packaging is typically used for automated assembly processes where components are fed directly from tape into placement equipment.

Q: Do both parts meet the same compliance standards?

A: Yes. Both ES1CL MHG and ES1CL RVG are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8541.10.0080. Both have Moisture Sensitivity Level (MSL) of 1 (Unlimited).

Q: What is the operating temperature range for these parts?

A: Both parts operate across a junction temperature range of -55°C to 150°C, providing equivalent thermal performance for industrial and commercial applications.

Q: Which part should be selected based on inventory availability?

A: ES1CL MHG has 1004 pieces in stock, while ES1CL RVG has 59700 pieces in stock. Selection should be based on packaging format requirements and supply chain needs.