ES1CLHRUG Equivalent & Substitute Parts

Part Overview

The ES1CLHRUG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150 V DC reverse voltage and 1 A average rectified current. This component is classified as a fast recovery diode with a reverse recovery time of 35 ns, suitable for surface mount applications in the DO-219AB (Sub SMA) package. The part maintains Active product status and carries AEC-Q101 automotive qualification, making it suitable for automotive and industrial applications requiring reliable rectification performance.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product family, allowing for component interchangeability in design and procurement scenarios.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	150	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	950 mV @ 1 A	mV
Reverse Recovery Time (trr)	35	ns
Current - Reverse Leakage @ Vr	5	µA @ 150 V
Capacitance @ Vr, F	10	pF @ 4V, 1MHz
Package / Case	DO-219AB	Sub SMA
Operating Temperature - Junction	-55 to 150	°C
Technology	Standard
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)

Substitute Part Grouping Explanation

Substitution eligibility for the ES1CLHRUG is determined by strict equivalence across the following critical parameters:

Voltage Rating: DC reverse voltage of 150 V maximum
Current Rating: Average rectified current of 1 A
Forward Voltage Drop: 950 mV maximum at 1 A forward current
Recovery Characteristics: Fast recovery classification with 35 ns reverse recovery time
Reverse Leakage: 5 µA maximum at 150 V reverse bias
Junction Capacitance: 10 pF at 4 V, 1 MHz
Package Type: DO-219AB (Sub SMA) surface mount configuration
Temperature Range: -55°C to 150°C junction operating temperature
Compliance Standards: RoHS3 compliance, AEC-Q101 automotive qualification

The ES1CL RVG meets all specified electrical and mechanical parameters, differing only in packaging format (Cut Tape versus standard packaging), which does not affect functional equivalence.

Parameter Comparison

Parameter	ES1CLHRUG	ES1CL RVG	Match
Voltage - DC Reverse (Vr) (Max)	150 V	150 V	✓
Current - Average Rectified (Io)	1 A	1 A	✓
Voltage - Forward (Vf) (Max) @ If	950 mV @ 1 A	950 mV @ 1 A	✓
Reverse Recovery Time (trr)	35 ns	35 ns	✓
Current - Reverse Leakage @ Vr	5 µA @ 150 V	5 µA @ 150 V	✓
Capacitance @ Vr, F	10 pF @ 4V, 1MHz	10 pF @ 4V, 1MHz	✓
Package / Case	DO-219AB	DO-219AB	✓
Supplier Device Package	Sub SMA	Sub SMA	✓
Operating Temperature - Junction	-55°C ~ 150°C	-55°C ~ 150°C	✓
Technology	Standard	Standard	✓
Speed Classification	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	✓
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	✓
Mounting Type	Surface Mount	Surface Mount	✓
Base Product Number	ES1C	ES1C	✓
Product Status	Active	Active	✓

Engineering Selection Recommendations

Both the ES1CLHRUG and ES1CL RVG maintain Active product status from Taiwan Semiconductor Corporation and carry identical electrical specifications. Both components satisfy RoHS3 compliance requirements and AEC-Q101 automotive qualification standards. The ES1CL RVG offers significantly higher inventory availability (59,700 pieces versus 1,027 pieces), which may provide procurement advantages for high-volume applications.

Selection between these parts should be based on supply chain requirements and packaging format preferences. The Cut Tape (CT) packaging of the ES1CL RVG is suitable for automated assembly processes, while the standard packaging of the ES1CLHRUG may be preferred for manual or mixed-mode assembly environments. Both configurations deliver identical functional performance in rectification applications requiring 150 V, 1 A fast recovery diode characteristics.

Frequently Asked Questions (FAQ)

Q: Can ES1CL RVG be used as a direct replacement for ES1CLHRUG in existing designs?

A: Yes. Both parts share identical electrical parameters including voltage rating, current capacity, forward voltage drop, reverse recovery time, and leakage characteristics. The DO-219AB (Sub SMA) package footprint is identical, enabling direct PCB compatibility.

Q: What is the difference between ES1CLHRUG and ES1CL RVG?

A: The primary difference is packaging format. ES1CLHRUG uses standard packaging, while ES1CL RVG is supplied in Cut Tape (CT) format. This distinction affects supply chain handling and automated assembly compatibility but does not alter electrical performance or functional characteristics.

Q: Are both parts suitable for automotive applications?

A: Yes. Both ES1CLHRUG and ES1CL RVG carry AEC-Q101 automotive qualification and maintain Active product status, confirming suitability for automotive-grade rectification applications.

Q: What are the critical electrical parameters that define substitution eligibility?

A: Substitution is determined by matching voltage rating (150 V), current rating (1 A), forward voltage drop (950 mV @ 1 A), reverse recovery time (35 ns), reverse leakage (5 µA @ 150 V), and junction capacitance (10 pF @ 4V, 1MHz). Both parts meet these specifications identically.

Q: Does packaging format affect circuit performance?

A: No. Cut Tape (CT) and standard packaging formats do not affect electrical performance. The difference is purely logistical, relating to component handling, storage, and automated assembly compatibility.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance status, REACH unaffected designation, and AEC-Q101 automotive qualification. Compliance profiles are equivalent.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message