ES1CLHRTG Equivalent & Substitute Parts

Part Overview

The ES1CLHRTG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150 V DC reverse voltage and 1 A average rectified current. This surface mount component operates in the fast recovery category with a reverse recovery time of 35 ns, making it suitable for switching power supply and general rectification applications. The part is Active in product status and carries AEC-Q101 automotive qualification with ROHS3 compliance. Substitute parts are identified when electrical characteristics, mechanical compatibility, and regulatory certifications remain equivalent across alternative packaging or supplier configurations.

Substiute Parts

ES1CLHRTG

Taiwan Semiconductor CorporationIn Stock: 978ES1CLHRTG Datasheet

Current PartRFQ

ES1CL RVG

Taiwan Semiconductor CorporationIn Stock: 59797ES1CL RVG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ES1CLHRTG is determined by equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io): 1 A
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 1 A
• Reverse Recovery Time (trr): 35 ns
• Current - Reverse Leakage @ Vr: 5 µA @ 150 V
• Capacitance @ Vr, F: 10 pF @ 4V, 1MHz
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Equivalence Criteria:

• Package / Case: DO-219AB (Sub SMA)
• Mounting Type: Surface Mount

Regulatory & Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Qualification: AEC-Q101
• Product Status: Active
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part ES1CL RVG maintains identical electrical performance and mechanical compatibility while differing only in packaging configuration (Cut Tape versus standard packaging).

Parameter Comparison

Engineering Selection Recommendations

Both ES1CLHRTG and ES1CL RVG are Active products from Taiwan Semiconductor Corporation with identical electrical and mechanical specifications. Selection between these parts is determined by supply chain availability and packaging requirements rather than functional performance.

ES1CLHRTG is appropriate for applications requiring standard packaging configuration with current inventory of 884 pieces.

ES1CL RVG is appropriate for high-volume applications or when Cut Tape packaging is specified, with significantly higher inventory availability of 59,700 pieces.

Both parts satisfy ROHS3 compliance, carry MSL 1 (Unlimited) moisture sensitivity rating, and maintain identical thermal operating range of -55°C to 150°C. The ES1CLHRTG carries explicit AEC-Q101 automotive qualification; this certification status for ES1CL RVG is not specified in available documentation.

Frequently Asked Questions (FAQ)

Q: Can ES1CL RVG be used as a direct replacement for ES1CLHRTG in automotive applications?

A: Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical characteristics, mechanical package (DO-219AB Sub SMA), and thermal operating range. However, AEC-Q101 automotive qualification is explicitly stated for ES1CLHRTG only. Verification of ES1CL RVG automotive qualification status is required before substitution in automotive circuits.

Q: What is the difference between ES1CLHRTG and ES1CL RVG?

A: The parts are electrically and mechanically identical. The primary difference is packaging configuration: ES1CLHRTG uses standard packaging while ES1CL RVG is supplied in Cut Tape (CT) format. This distinction affects handling, storage, and automated assembly processes but does not alter component performance.

Q: Are both parts suitable for fast recovery rectification applications?

A: Yes. Both ES1CLHRTG and ES1CL RVG are classified as Fast Recovery diodes with reverse recovery time of 35 ns, meeting the Fast Recovery ≤ 500ns, > 200mA (Io) specification. Both are suitable for switching power supply and high-frequency rectification circuits.

Q: What is the maximum junction temperature for these diodes?

A: Both parts operate with a maximum junction temperature of 150°C and minimum junction temperature of -55°C, providing a total operating range of 205°C.

Q: Are these parts RoHS compliant?

A: Yes. Both ES1CLHRTG and ES1CL RVG are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulatory requirements.

Q: What is the reverse leakage current specification?

A: Both parts specify a maximum reverse leakage current of 5 µA at the rated reverse voltage of 150 V.