Equivalent & Substitute Parts Reference for ES01FV1

Part Overview

Manufacturer part number ES01FV1, produced by Sanken Electric USA Inc., belongs to the Diodes, Rectifiers category. This component is a general-purpose diode rated for 1500 V reverse voltage and 500 mA average rectified current in an axial through-hole package. The product is currently active with available inventory. In engineering applications, sourcing equivalent or substitute models is essential to maintain supply chain continuity, ensure compliance with RoHS, and accommodate specific inventory requirements, especially when product status remains active and direct substitutes exist.

Substiute Parts

ES01FV1

Sanken Electric USA Inc.In Stock: 1131ES01FV1 Datasheet

Current PartRFQ

ES 1FV1

Sanken Electric USA Inc.In Stock: 1249ES 1FV1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped based on strict matching of the following parameters: voltage – DC reverse (Vr) (Max), current – average rectified (Io), voltage – forward (Vf) (Max) @ If, reverse recovery time (trr), current – reverse leakage @ Vr, mounting type, packaging, product status, RoHS status, moisture sensitivity level, and operating temperature range. Only components with identical electrical, mechanical, and regulatory parameters belonging to the Diodes, Rectifiers category, in an axial through-hole package, are considered valid equivalents.

Parameter Comparison

Engineering Selection Recommendations

For engineering selection, ES01FV1 and ES 1FV1 meet all required parameters concerning voltage, current, leakage, recovery time, mechanical packaging, and mounting type. Both parts maintain active product status with favorable RoHS compliance and unlimited moisture sensitivity level (MSL 1). ECCN and HTSUS codes are identical. From a compliance and regulatory perspective, both are suitable for direct substitution in designs requiring Diodes, Rectifiers with specified voltage and current ratings.

Frequently Asked Questions (FAQ)

Q1: What determines a valid substitute for ES01FV1 in the diodes, rectifiers category?
A1: Valid substitution requires identical voltage – DC reverse, current – average rectified, mounting type, packaging, recovery time, reverse leakage, product status, RoHS compliance, operating temperature range, and mechanical package.

Q2: Are ES01FV1 and ES 1FV1 electrically and mechanically compatible?
A2: Based strictly on provided parameters, ES01FV1 and ES 1FV1 are electrically and mechanically equivalent for use in designs requiring axial, through-hole mounting.

Q3: Do packaging or compliance differences affect substitution?
A3: Both ES01FV1 and ES 1FV1 are supplied in Cut Tape (CT) packaging and meet RoHS and MSL 1 requirements, supporting direct interchange in compliant assemblies.

Q4: Is there any difference in product status between these parts?
A4: Both part numbers are listed as active and are available in new original inventory, indicating ongoing manufacturer support.

Q5: Should ECCN or HTSUS codes be reviewed before substitution?
A5: Both ES01FV1 and ES 1FV1 have matching ECCN (EAR99) and HTSUS (8541.10.0070) codes, supporting compatibility in regulated applications.