ERO-S2PHF13R0 Equivalent & Substitute Parts

Part Overview

The ERO-S2PHF13R0 is a 13 Ohm ±1% 0.25W (1/4W) through-hole resistor with axial metal film construction, manufactured by Panasonic Electronic Components. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production, maintenance, and repair applications. The part operates across a temperature range of -55°C to 150°C with a temperature coefficient of ±50ppm/°C.

Substiute Parts

ERO-S2PHF13R0

Panasonic Electronic ComponentsIn Stock: 890ERO-S2PHF13R0 Datasheet

Current PartRFQ

RNMF14FTC13R0

Stackpole Electronics IncIn Stock: 1098RNMF14FTC13R0 Datasheet

DirectRFQ

CMF5013R000FHEB

Vishay DaleIn Stock: 990CMF5013R000FHEB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERO-S2PHF13R0 are qualified based on the following electrical and mechanical parameters:

• Resistance value: 13 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Composition: Metal Film (exact match required)
• Package type: Axial (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Number of terminations: 2 (exact match required)

Two substitute parts meet these criteria: RNMF14FTC13R0 (Stackpole Electronics Inc) and CMF5013R000FHEB (Vishay Dale). Both are active products with metal film axial construction, identical electrical specifications, and compatible physical dimensions within acceptable tolerances for through-hole assembly.

Parameter Comparison

Engineering Selection Recommendations

Both RNMF14FTC13R0 and CMF5013R000FHEB are functionally equivalent to the obsolete ERO-S2PHF13R0 based on electrical specifications. Selection between these two active alternatives depends on regulatory and environmental requirements:

RNMF14FTC13R0 (Stackpole Electronics Inc) is suitable for applications requiring ROHS3 compliance with REACH unaffected status. This part features flame retardant coating and safety characteristics, with an operating temperature range extending to 155°C.

CMF5013R000FHEB (Vishay Dale) is suitable for applications requiring ROHS3 compliance where REACH affected status is acceptable. This part includes flame retardant coating, moisture resistant properties, and safety characteristics, with an extended operating temperature range to 175°C. The moisture resistant feature provides additional environmental protection.

Both parts are available in tape and reel packaging for automated assembly. Physical dimensions vary slightly but remain compatible with standard through-hole PCB layouts designed for 0.067" to 0.070" diameter axial components.

Frequently Asked Questions (FAQ)

Q: Can RNMF14FTC13R0 or CMF5013R000FHEB be used as direct replacements for ERO-S2PHF13R0?

A: Yes. Both substitute parts match the critical electrical parameters: 13 Ohm resistance, ±1% tolerance, 0.25W power rating, metal film composition, ±50ppm/°C temperature coefficient, and axial package type. Physical dimensions are within acceptable tolerances for through-hole assembly.

Q: What is the difference between the two substitute parts?

A: Both parts meet identical electrical specifications. RNMF14FTC13R0 operates to 155°C with REACH unaffected status. CMF5013R000FHEB operates to 175°C with moisture resistant properties and REACH affected status. Selection depends on application temperature requirements and regulatory compliance needs.

Q: Are there packaging considerations when switching from ERO-S2PHF13R0 to these substitutes?

A: The original part is supplied in bulk packaging. Both substitutes are supplied in tape and reel format, which is standard for automated assembly. Manual assembly applications can use tape and reel components without modification.

Q: Do the physical dimension differences affect PCB compatibility?

A: The substitute parts have slightly different diameters and lengths compared to the original part. All three components fall within the standard range for 1/4W axial resistors and are compatible with PCB layouts designed for this component class. Verify specific PCB hole spacing and lead bend radius requirements for your application.

Q: Which substitute part should be selected for high-temperature applications?

A: CMF5013R000FHEB supports operation to 175°C, compared to 155°C for RNMF14FTC13R0. For applications exceeding 155°C, CMF5013R000FHEB is the appropriate selection.