ERM 1-465 LED Standoff Equivalent & Substitute Parts

Part Overview

The ERM 1-465 is a 2 and 3 Lead LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.465" (11.81mm) vertical height. This component is designed for universal LED mounting applications and maintains Active product status. Substitute parts are identified when inventory constraints, lead time requirements, or application-specific needs necessitate alternative components that maintain functional compatibility within the ERM 1 series.

Substiute Parts

ERM 1-465

Bivar Inc.In Stock: 979ERM 1-465 Datasheet

Current PartRFQ

ERM 1-450

Bivar Inc.In Stock: 15334ERM 1-450 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the ERM 1-465 product family is determined by the following critical parameters:

Substitution Criteria:

• Manufacturer: Bivar Inc. (same manufacturer required)
• Series: ERM 1 (same series designation)
• LED Configuration: 2 and 3 Lead LEDs (identical lead count support)
• Material: Black PVC (same material composition)
• Product Status: Active (current production status)
• RoHS Compliance: ROHS3 Compliant (regulatory alignment)
• Moisture Sensitivity Level: 1 (Unlimited) (identical MSL rating)

Variable Parameter:

• Length: Differs between main part and substitute to accommodate specific mounting height requirements

The ERM 1-450 substitute part maintains all critical functional and compliance parameters while providing an alternative vertical height specification of 0.450" (11.43mm) compared to the primary part's 0.465" (11.81mm).

Parameter Comparison

Engineering Selection Recommendations

ERM 1-465 Primary Selection: The ERM 1-465 is the specified component for applications requiring a 0.465" (11.81mm) vertical standoff height. This part maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating, suitable for standard production environments.

ERM 1-450 Substitute Selection: The ERM 1-450 serves as a functional substitute when the primary part is unavailable or when application geometry accommodates a reduced vertical height of 0.450" (11.43mm). This substitute maintains identical compliance certifications, material specifications, and LED configuration support. Both parts are manufactured by Bivar Inc. within the same ERM 1 series and carry equivalent regulatory approvals.

Selection between these parts is determined solely by the required vertical mounting height specification for the target application.

Frequently Asked Questions (FAQ)

Q: Can ERM 1-450 be used in place of ERM 1-465?

A: The ERM 1-450 is a functional substitute only when the application design accommodates a 0.015" (0.38mm) reduction in vertical height. Both parts support identical 2 and 3 lead LED configurations and maintain equivalent material, compliance, and packaging specifications.

Q: Are there differences in LED lead compatibility between these parts?

A: No. Both ERM 1-465 and ERM 1-450 support 2 and 3 lead LED configurations identically. The only difference is the vertical standoff height.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant with identical moisture sensitivity levels (MSL 1 - Unlimited) and carry the same ECCN and HTSUS classifications.

Q: What is the height difference between these parts?

A: The ERM 1-465 provides 0.465" (11.81mm) height, while the ERM 1-450 provides 0.450" (11.43mm) height, representing a 0.015" (0.38mm) difference.

Q: Are both parts available in the same packaging format?

A: Yes. Both ERM 1-465 and ERM 1-450 are supplied in bag packaging.

Q: Which part should I select for new designs?

A: Selection depends on the required vertical mounting height for your specific application. Verify that your PCB layout and component clearance requirements accommodate the chosen standoff height before finalizing component selection.