ERM 1-415 LED Standoff Equivalent & Substitute Parts

Part Overview

The ERM 1-415 is a 2 and 3 Lead LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.415" (10.54mm) vertical mounting height. This component is designed for universal LED applications requiring precise standoff positioning. The part maintains Active product status and is RoHS3 compliant, making it suitable for current production environments. Equivalent substitute parts are identified based on matching electrical compatibility, mechanical form factor, material composition, and regulatory compliance within the ERM 1 series.

Substiute Parts

ERM 1-415

Bivar Inc.In Stock: 786ERM 1-415 Datasheet

Current PartRFQ

ERM 1-410

Bivar Inc.In Stock: 1468ERM 1-410 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the ERM 1-415 product family is determined by the following critical parameters:

Mechanical Compatibility: Length tolerance, material composition (black PVC), and vertical mounting orientation must remain consistent across substitute parts.

Electrical Compatibility: LED lead configuration (2 and 3 Lead LEDs) must match to ensure proper circuit integration.

Regulatory Compliance: RoHS3 compliance and MSL rating (1 - Unlimited) are mandatory for production equivalency.

Series Consistency: All substitute parts must belong to the ERM 1 series manufactured by Bivar Inc.

The ERM 1-410 qualifies as a parametric equivalent based on these criteria, with the primary distinction being the length specification (0.410" versus 0.415").

Parameter Comparison

Engineering Selection Recommendations

Both the ERM 1-415 and ERM 1-410 maintain Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on the specific mechanical height requirement of the application. The 0.005" (0.13mm) length differential between the two parts represents a minor dimensional variation within the ERM 1 series design envelope. Both parts are manufactured by Bivar Inc. and support identical LED lead configurations (2 and 3 Lead LEDs) with equivalent regulatory certifications. Inventory availability should also be considered in component selection, as the ERM 1-410 currently maintains higher stock levels (1382 Pcs) compared to the ERM 1-415 (768 Pcs).

Frequently Asked Questions (FAQ)

Q: Can the ERM 1-410 be used as a direct replacement for the ERM 1-415?

A: The ERM 1-410 is a parametric equivalent within the ERM 1 series with matching LED configuration, material, color, and compliance ratings. The primary difference is the length specification: 0.410" versus 0.415". Substitution is valid when the application tolerates a 0.005" (0.13mm) height reduction.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution eligibility is determined by: LED lead configuration (2 and 3 Lead LEDs), material composition (black PVC), vertical mounting orientation, RoHS3 compliance status, and MSL rating (1 - Unlimited). All substitute parts must belong to the ERM 1 series from Bivar Inc.

Q: Are there any electrical differences between the ERM 1-415 and ERM 1-410?

A: No electrical differences exist between these parts. Both support 2 and 3 Lead LED configurations and maintain identical regulatory compliance certifications.

Q: How does the length difference affect mechanical compatibility?

A: The 0.005" (0.13mm) length differential is a minor mechanical variation. Compatibility depends on the specific application's height tolerance requirements. Applications with strict height specifications should confirm dimensional acceptance before substitution.

Q: What is the significance of the MSL rating for these parts?

A: Both parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly. This rating applies uniformly across the ERM 1-415 and ERM 1-410.

Q: Are both parts suitable for current production use?

A: Yes. Both the ERM 1-415 and ERM 1-410 maintain Active product status and full RoHS3 compliance, making them suitable for current production environments.