ERM 1-245 LED Standoff Equivalent & Substitute Parts

Part Overview

The ERM 1-245 is a 2 and 3 Lead LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with universal compatibility. This component features a black PVC construction with a 0.245" (6.22mm) standoff height and is classified as an active product with full ROHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this LED standoff category, enabling direct component selection for design flexibility and supply chain optimization.

Substiute Parts

ERM 1-245

Bivar Inc.In Stock: 898ERM 1-245 Datasheet

Current PartRFQ

ERM 1-6MM

Bivar Inc.In Stock: 2830ERM 1-6MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERM 1-245 are identified based on strict alignment of the following critical parameters:

• Series Compatibility: Both parts belong to the ERM 1 series
• LED Configuration: Both support 2 and 3 Lead LEDs
• Material Composition: Both utilize black PVC construction
• Mounting Orientation: Both are configured for vertical mounting
• Compliance Standards: Both maintain ROHS3 compliance
• Moisture Sensitivity Level: Both rated at MSL 1 (Unlimited)
• Mechanical Tolerance: Standoff height variation within acceptable range for universal LED applications

The ERM 1-6MM qualifies as a parametric equivalent based on these criteria, with a standoff height of 0.240" (6.10mm) compared to the 0.245" (6.22mm) of the main part, representing a 0.005" (0.12mm) dimensional variance within the universal compatibility specification for this product category.

Parameter Comparison

Engineering Selection Recommendations

Both ERM 1-245 and ERM 1-6MM are active products manufactured by Bivar Inc. with identical ROHS3 compliance and MSL 1 ratings. Selection between these parts is determined by the specific standoff height requirement of the application. The ERM 1-245 provides a 0.245" (6.22mm) height, while the ERM 1-6MM provides a 0.240" (6.10mm) height. Both parts are suitable for 2 and 3 Lead LED applications with universal mounting compatibility. Component selection should be based on the mechanical clearance and alignment specifications of the target PCB assembly.

Frequently Asked Questions (FAQ)

Q: Can ERM 1-6MM be used as a direct replacement for ERM 1-245?

A: Both parts share identical electrical and material specifications within the ERM 1 series. The primary difference is standoff height: ERM 1-245 at 0.245" (6.22mm) versus ERM 1-6MM at 0.240" (6.10mm). Substitution is valid when the application tolerates a 0.005" (0.12mm) height variance.

Q: What LED configurations do these standoffs support?

A: Both ERM 1-245 and ERM 1-6MM are designed for 2 and 3 Lead LED applications, providing universal compatibility across these LED types.

Q: Are both parts RoHS compliant?

A: Yes. Both ERM 1-245 and ERM 1-6MM are ROHS3 compliant and carry an MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the material composition of these standoffs?

A: Both parts are constructed from black PVC material, providing consistent mechanical and thermal properties across the ERM 1 series.

Q: How does packaging affect component selection?

A: Both parts are supplied in bag packaging. Inventory availability may influence procurement decisions: ERM 1-245 has 882 Pcs in stock, while ERM 1-6MM has 2776 Pcs in stock.