ERJ-UP6F3602V Equivalent & Substitute Parts

Part Overview

The ERJ-UP6F3602V is a 36 kOhms ±1% 0.5W chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating, automotive AEC-Q200 qualification, and pulse withstanding capability, making it suitable for automotive and industrial applications requiring high reliability. The part is currently active in production with 708 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive certifications align with the original component requirements.

Substiute Parts

ERJ-UP6F3602V

Panasonic Electronic ComponentsIn Stock: 804ERJ-UP6F3602V Datasheet

Current PartRFQ

CRCW080536K0FKEAHP

Vishay DaleIn Stock: 5681CRCW080536K0FKEAHP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-UP6F3602V is determined by strict alignment of the following parameters:

• Resistance value: 36 kOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The CRCW080536K0FKEAHP from Vishay Dale meets all these criteria and is classified as a direct equivalent substitute. Both parts share identical electrical specifications, mechanical dimensions, and automotive certifications required for interchangeable use in equivalent circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-UP6F3602V and CRCW080536K0FKEAHP are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on:

• Availability and lead time requirements
• Procurement cost and inventory levels
• PCB assembly process constraints, particularly regarding component height clearance (the Vishay part has a lower seated height of 0.020" versus 0.028" for the Panasonic part)
• Supplier qualification and quality agreements already established within your organization

Both parts are electrically and mechanically interchangeable for applications requiring 36 kOhms ±1% 0.5W thick film resistors in 0805 package with automotive-grade reliability.

Frequently Asked Questions (FAQ)

Q: Can CRCW080536K0FKEAHP be used as a direct replacement for ERJ-UP6F3602V?

A: Yes. Both parts have identical electrical specifications (36 kOhms ±1% 0.5W), identical package dimensions (0805 / 2012 Metric), matching temperature coefficients (±100ppm/°C), identical operating temperature range (-55°C ~ 155°C), and equivalent automotive certifications (AEC-Q200). Both are ROHS3 compliant with MSL 1 rating.

Q: Are there any physical differences between these parts?

A: The seated height differs slightly. The ERJ-UP6F3602V has a maximum seated height of 0.028" (0.70mm), while the CRCW080536K0FKEAHP has a maximum seated height of 0.020" (0.50mm). This difference may be relevant for applications with tight vertical clearance constraints on the PCB.

Q: Do both parts meet automotive standards?

A: Yes. Both the ERJ-UP6F3602V and CRCW080536K0FKEAHP carry AEC-Q200 qualification, indicating compliance with automotive reliability and quality standards.

Q: What is the significance of the ±1% tolerance specification?

A: The ±1% tolerance indicates that the actual resistance value will not deviate more than 1% from the nominal 36 kOhms value. This tight tolerance is critical for precision analog circuits, filtering networks, and sensor signal conditioning where resistance accuracy directly affects circuit performance.

Q: Are moisture sensitivity considerations important for these parts?

A: Both parts have Moisture Sensitivity Level (MSL) 1, which means unlimited shelf life without moisture control measures. Standard storage conditions are acceptable without requiring dry-pack or desiccant storage.