Equivalent & Substitute Parts for ERJ-T06J751V

Part Overview

The ERJ-T06J751V is a 750 Ohm ±5% 0.25W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This automotive-grade component meets AEC-Q200 qualification and features pulse withstanding capability, making it suitable for demanding automotive and industrial applications. The part is currently active in production with 659 units in stock.

Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, support design upgrades, or enable performance enhancements while maintaining functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

ERJ-T06J751V

Panasonic Electronic ComponentsIn Stock: 740ERJ-T06J751V Datasheet

Current PartRFQ

ERJ-P06J751V

Panasonic Electronic ComponentsIn Stock: 2366ERJ-P06J751V Datasheet

DirectRFQ

ESR10EZPF7500

Rohm SemiconductorIn Stock: 5830ESR10EZPF7500 Datasheet

UpgradeRFQ

ESR10EZPJ751

Rohm SemiconductorIn Stock: 60966ESR10EZPJ751 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 750 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• Automotive Rating: AEC-Q200 (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Allowable Variation Parameters:

• Tolerance: ±5% or tighter (±1% is acceptable as upgrade)
• Power Rating: Equal to or greater than 0.25W (0.5W and 0.4W are acceptable)
• Temperature Coefficient: ±200ppm/°C or better (±100ppm/°C is acceptable as upgrade)
• Height - Seated: Within physical constraints of 0805 package

The substitute parts listed below meet all mandatory compatibility parameters and represent either direct equivalents or performance upgrades.

Parameter Comparison

Engineering Selection Recommendations

ERJ-P06J751V (Panasonic, 0.5W): Direct manufacturer equivalent with identical electrical specifications and tolerance. Increased power rating provides thermal margin. Maintains Panasonic product line continuity. Suitable for direct substitution where higher power dissipation capability is beneficial or required.

ESR10EZPJ751 (Rohm Semiconductor, 0.4W, ±5%): Cross-manufacturer substitute with matching tolerance and resistance. Increased power rating and lower seated height (0.65mm vs 0.70mm) provide design flexibility. Maintains ±5% tolerance specification. Highest inventory availability supports supply chain reliability.

ESR10EZPF7500 (Rohm Semiconductor, 0.4W, ±1%): Performance upgrade option with tighter tolerance (±1% vs ±5%) and improved temperature coefficient (±100ppm/°C vs ±200ppm/°C). Increased power rating and lower seated height. Suitable for applications requiring enhanced accuracy and thermal stability. All parts maintain AEC-Q200 automotive qualification and ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J751V replace ERJ-T06J751V in my design? A: Yes. ERJ-P06J751V is a direct Panasonic equivalent with identical resistance, tolerance, package, and operating temperature range. The increased power rating (0.5W vs 0.25W) provides additional thermal capability without affecting electrical performance.

Q: What is the difference between the Panasonic and Rohm substitute parts? A: All three substitute parts meet the same resistance (750 Ohms), package (0805), and automotive qualification (AEC-Q200) requirements. Differences exist in manufacturer, power rating, and tolerance. Panasonic parts maintain product line continuity, while Rohm parts offer higher inventory availability and, in the case of ESR10EZPF7500, improved tolerance and temperature coefficient.

Q: Can I use ESR10EZPF7500 instead of ERJ-T06J751V? A: Yes. ESR10EZPF7500 meets all mandatory compatibility parameters. It provides performance enhancements through tighter tolerance (±1%) and improved temperature coefficient (±100ppm/°C). The 0.4W power rating exceeds the 0.25W requirement, and the lower seated height (0.65mm) may provide PCB layout advantages.

Q: Are all substitute parts AEC-Q200 qualified? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and ROHS3 compliance, meeting the same regulatory and quality standards as the main part.

Q: What is the physical compatibility of these parts? A: All parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Seated heights vary slightly: Panasonic parts are 0.70mm maximum, Rohm parts are 0.65mm maximum. This variation is within standard PCB assembly tolerances and does not affect interchangeability.

Q: Which substitute part should I choose for maximum supply availability? A: ESR10EZPJ751 offers the highest inventory level (60,905 units) among all listed parts, providing the strongest supply chain position for high-volume production requirements.