Equivalent & Substitute Parts for ERJ-T06J151V

Part Overview

The ERJ-T06J151V is a 150 Ohm ±5% 0.25W thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features pulse withstanding capability. The part is currently active in production with 757 pieces in stock.

Substitute parts are necessary when the original part becomes unavailable, when design requirements change to accommodate higher power dissipation, improved tolerance specifications, or when alternative manufacturers' components are preferred for supply chain optimization or cost considerations.

Key Parameters

Parameter	Value
Resistance	150 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-T06J151V is determined by the following criteria:

Mandatory Parameters (Must Match):

Resistance value: 150 Ohms
Tolerance: ±5%
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C to 155°C
Automotive Rating: AEC-Q200
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: MSL 1

Flexible Parameters (May Vary):

Power Rating: May be equal or higher than 0.25W
Tolerance: May be tighter (±1%) than specified
Manufacturer: Alternative manufacturers acceptable
Product Status: Active or Not For New Designs both acceptable
Height: Minor variations acceptable within package specification

Substitute parts are grouped into two categories: direct substitutes (matching all parameters including power rating) and upgrade substitutes (higher power rating or improved tolerance while maintaining all other specifications).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status	Height (Max)
ERJ-T06J151V	Panasonic	150Ω	±5%	0.25W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028"
ERJ-P06J151V	Panasonic	150Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028"
ERJ-P6WF1500V	Panasonic	150Ω	±1%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Not For New Designs	0.030"
ERJ-P6WJ151V	Panasonic	150Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Not For New Designs	0.030"
ERJ-UP6J151V	Panasonic	150Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028"
CRCW0805150RJNEAHP	Vishay Dale	150Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.020"
ESR10EZPJ151	Rohm Semiconductor	150Ω	±5%	0.4W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.026"
RCS0805150RJNEA	Vishay Dale	150Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Active	0.020"

Engineering Selection Recommendations

For Direct Substitution (Same Electrical Performance): ERJ-P06J151V is the primary direct substitute from Panasonic, offering identical electrical specifications with increased power rating (0.5W vs 0.25W). This part is currently active in production with high inventory availability (68,733 pieces).

For Active Production Designs: ERJ-UP6J151V is recommended as the preferred substitute for new designs. This part is active in production, offers 0.5W power rating, and includes anti-sulfur protection in addition to standard AEC-Q200 automotive qualification. Height specification matches the original part at 0.028" maximum.

For Cross-Manufacturer Substitution: CRCW0805150RJNEAHP (Vishay Dale) and RCS0805150RJNEA (Vishay Dale) are both active production alternatives with 0.5W power rating and AEC-Q200 compliance. Both feature reduced height (0.020" maximum) compared to the original part, which may provide advantages in space-constrained applications.

ESR10EZPJ151 (Rohm Semiconductor) is an active production alternative with 0.4W power rating, meeting the minimum power requirement with margin above the original 0.25W specification.

For Legacy or Discontinued Designs: ERJ-P6WF1500V and ERJ-P6WJ151V are marked as "Not For New Designs" and should only be used when maintaining existing production lines or when specifically required by design documentation. Both are Panasonic products with AEC-Q200 compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J151V replace ERJ-T06J151V in my circuit? A: Yes. ERJ-P06J151V maintains all critical electrical parameters (150Ω ±5%, ±200ppm/°C, -55°C to 155°C operating range, AEC-Q200) while providing higher power dissipation capability (0.5W vs 0.25W). The 0805 package dimensions are identical. This is a direct functional substitute.

Q: What is the difference between ERJ-UP6J151V and ERJ-P06J151V? A: Both parts share identical electrical specifications (150Ω ±5%, 0.5W, AEC-Q200). The primary difference is that ERJ-UP6J151V includes anti-sulfur protection and is currently active in production, while ERJ-P06J151V is also active. ERJ-UP6J151V is preferred for new designs requiring enhanced environmental protection.

Q: Can I use a ±1% tolerance part (ERJ-P6WF1500V) instead of ±5%? A: Yes, from a functional standpoint. Tighter tolerance specifications are compatible with designs requiring ±5% tolerance. However, ERJ-P6WF1500V is marked "Not For New Designs." For new applications, use ERJ-UP6J151V or CRCW0805150RJNEAHP instead.

Q: Are Vishay Dale parts (CRCW0805150RJNEAHP, RCS0805150RJNEA) compatible with Panasonic ERJ-T06J151V? A: Yes. Both Vishay Dale parts maintain the same resistance (150Ω), tolerance (±5%), package (0805), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 automotive qualification. Both offer 0.5W power rating and are currently in active production.

Q: Does the height difference between parts affect PCB layout? A: The original ERJ-T06J151V has a maximum height of 0.028". Substitute parts range from 0.020" to 0.030" maximum height. All variations remain within standard 0805 package specifications. Height differences are typically not critical for PCB layout unless the design has specific height constraints documented in assembly drawings.

Q: Which substitute part has the best availability? A: ESR10EZPJ151 (Rohm Semiconductor) has the highest inventory at 159,645 pieces. ERJ-P06J151V (Panasonic) has 68,733 pieces. Both are suitable for high-volume applications requiring immediate availability.

Q: Can I use ESR10EZPJ151 with its 0.4W rating instead of 0.25W or 0.5W? A: Yes. ESR10EZPJ151 provides 0.4W power dissipation capability, which exceeds the original 0.25W requirement and falls between the original and upgraded 0.5W options. This part is suitable for applications where the original 0.25W rating is adequate but additional margin is desired.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message