Equivalent & Substitute Parts for ERJ-T06J110V

Part Overview

The ERJ-T06J110V is a 11 Ohms ±5% 0.25W (1/4W) chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor is designed for automotive applications with AEC-Q200 qualification and pulse withstanding capability. The part is currently active in production with 1064 units in stock. Substitute parts may be required due to inventory constraints, design upgrades for higher power dissipation requirements, or supply chain optimization.

Substiute Parts

ERJ-T06J110V

Panasonic Electronic ComponentsIn Stock: 1094ERJ-T06J110V Datasheet

Current PartRFQ

ERJ-P06J110V

Panasonic Electronic ComponentsIn Stock: 10551ERJ-P06J110V Datasheet

UpgradeRFQ

ESR10EZPJ110

Rohm SemiconductorIn Stock: 8744ESR10EZPJ110 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ERJ-T06J110V is determined by the following critical parameters:

• Resistance Value: Must be 11 Ohms
• Tolerance: Must be ±5%
• Package: Must be 0805 (2012 Metric)
• Composition: Must be Thick Film
• Automotive Compliance: Must maintain AEC-Q200 qualification
• Operating Temperature Range: Must support -55°C ~ 155°C
• Pulse Withstanding: Must be present

The substitute parts listed below maintain all critical electrical and mechanical parameters. Variations in power rating (0.5W or 0.4W) and temperature coefficient (±200ppm/°C or ±300ppm/°C) are allowable within the same package footprint and do not affect functional compatibility in circuits designed for the 0.25W specification.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active production status and full AEC-Q200 automotive compliance. The ERJ-P06J110V offers increased power dissipation capability (0.5W) while maintaining identical resistance, tolerance, and package specifications. The ESR10EZPJ110 from Rohm Semiconductor provides 0.4W power rating with improved temperature coefficient stability (±200ppm/°C) and slightly reduced seated height (0.65mm vs 0.70mm). Both substitute parts are electrically and mechanically compatible with the ERJ-T06J110V in 0805 package applications. Selection between substitutes depends on circuit power dissipation requirements and thermal management considerations.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J110V replace ERJ-T06J110V in all applications?

A: Yes. The ERJ-P06J110V maintains identical resistance (11 Ohms), tolerance (±5%), package (0805), composition (Thick Film), temperature range (-55°C ~ 155°C), and AEC-Q200 rating. The higher power rating (0.5W vs 0.25W) provides additional thermal margin and does not affect electrical compatibility.

Q: What is the difference between ESR10EZPJ110 and the Panasonic alternatives?

A: ESR10EZPJ110 is manufactured by Rohm Semiconductor and offers 0.4W power rating with ±200ppm/°C temperature coefficient compared to ±300ppm/°C for Panasonic parts. All other critical parameters including resistance, tolerance, package, and AEC-Q200 rating are identical.

Q: Are there physical footprint differences between these parts?

A: All three parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). The ESR10EZPJ110 has slightly reduced seated height (0.026" / 0.65mm) compared to 0.028" (0.70mm) for the Panasonic parts, which does not affect PCB layout compatibility.

Q: Do all substitute parts meet automotive requirements?

A: Yes. All three parts carry AEC-Q200 qualification, pulse withstanding capability, ROHS3 compliance, and unlimited moisture sensitivity level (MSL 1), meeting automotive-grade specifications.

Q: Can I use these parts interchangeably in production?

A: Yes, within the constraints of your circuit design. If your design specifies 0.25W power dissipation, the higher-rated substitutes (0.4W or 0.5W) are directly compatible. Verify that your PCB assembly process accommodates the slight height variation of the ESR10EZPJ110 if used.