ERJ-S1TJ512U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TJ512U is a 5.1 kOhms ±5% 1W thick film chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in harsh environments. The product is currently active and available in high volume (1130 pcs in stock). Substitute parts are necessary when the primary part becomes unavailable, when design requirements shift to alternative manufacturers, or when enhanced performance characteristics such as increased power rating are required.

Key Parameters

Parameter	Value
Resistance	5.1 kOhms
Tolerance	±5%
Power Rating	1W
Package / Case	2512 (6432 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TJ512U is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Resistance value: 5.1 kOhms
Tolerance: ±5%
Package: 2512 (6432 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C ~ 155°C
RoHS Compliance: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Consideration:

Power Rating: 1W (baseline); 1.5W acceptable as uprated alternative
Automotive Qualification: AEC-Q200 preferred for equivalent substitution

All substitute parts listed meet the primary criteria. The CRCW25125K10JNEGHP variant offers increased power rating (1.5W) and pulse withstanding capability, making it suitable for applications requiring enhanced thermal margin while maintaining all other electrical and mechanical specifications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff	Temp Range	AEC-Q200	Product Status	Inventory
ERJ-S1TJ512U	Panasonic	5.1 kΩ	±5%	1	±200ppm/°C	-55 to 155°C	Yes	Active	1130
ERJ-1TYJ512U	Panasonic	5.1 kΩ	±5%	1	±200ppm/°C	-55 to 155°C	Yes	Not For New Designs	18589
CR2512-JW-512ELF	Bourns Inc.	5.1 kΩ	±5%	1	±200ppm/°C	-55 to 155°C	No	Active	7371
CRCW25125K10JNEG	Vishay Dale	5.1 kΩ	±5%	1	±200ppm/°C	-55 to 155°C	Yes	Active	15065
CRCW25125K10JNEGHP	Vishay Dale	5.1 kΩ	±5%	1.5	±200ppm/°C	-55 to 155°C	Yes	Active	2963
RMCF2512JT5K10	Stackpole Electronics Inc	5.1 kΩ	±5%	1	±200ppm/°C	-55 to 155°C	Yes	Active	7034

Engineering Selection Recommendations

Primary Substitutes (Direct Equivalents): CRCW25125K10JNEG (Vishay Dale) and RMCF2512JT5K10 (Stackpole Electronics Inc) are direct functional equivalents with active product status and AEC-Q200 automotive qualification. Both maintain identical electrical specifications and package dimensions. Selection between these and the ERJ-S1TJ512U depends on supply chain availability and manufacturing partnership requirements.

Enhanced Performance Alternative: CRCW25125K10JNEGHP (Vishay Dale) provides the same electrical characteristics with increased power rating (1.5W) and pulse withstanding capability. This variant is suitable for designs requiring additional thermal margin or exposure to transient overvoltage conditions while maintaining full compatibility with 2512 package footprints.

Legacy Compatibility: ERJ-1TYJ512U (Panasonic) is electrically and mechanically equivalent but carries "Not For New Designs" status. This part remains available in high volume and is suitable only for sustaining production of existing designs or legacy system support.

Non-Automotive Alternative: CR2512-JW-512ELF (Bourns Inc.) meets all electrical and mechanical specifications but lacks AEC-Q200 certification. This part is appropriate for non-automotive applications or where automotive qualification is not a design requirement.

Frequently Asked Questions (FAQ)

Q: Can ERJ-1TYJ512U be used as a direct replacement for ERJ-S1TJ512U? A: Electrically and mechanically, yes. However, ERJ-1TYJ512U carries "Not For New Designs" status. It is suitable only for sustaining production of existing designs. For new product development, use active-status alternatives such as CRCW25125K10JNEG or RMCF2512JT5K10.

Q: What is the difference between CRCW25125K10JNEG and CRCW25125K10JNEGHP? A: Both are Vishay Dale parts with identical resistance, tolerance, and temperature characteristics. The primary difference is power rating: CRCW25125K10JNEG is rated 1W, while CRCW25125K10JNEGHP is rated 1.5W and includes pulse withstanding capability. The JNEGHP variant is suitable for applications requiring enhanced thermal performance.

Q: Is CR2512-JW-512ELF suitable for automotive applications? A: CR2512-JW-512ELF lacks AEC-Q200 automotive qualification. It is suitable for non-automotive applications or designs where automotive certification is not required. For automotive applications, use CRCW25125K10JNEG, CRCW25125K10JNEGHP, or RMCF2512JT5K10.

Q: Are all substitute parts compatible with the same PCB footprint? A: Yes. All substitute parts use the 2512 (6432 Metric) package. Physical dimensions vary slightly (length 6.30–6.40mm, width 3.10–3.20mm, height 0.70–0.75mm), but these variations fall within standard PCB design tolerances for 2512 footprints.

Q: Which substitute offers the best availability? A: ERJ-1TYJ512U has the highest inventory (18589 pcs), followed by CRCW25125K10JNEG (15065 pcs). For active-status parts suitable for new designs, CRCW25125K10JNEG offers the best combination of availability and product status.

Q: Can CRCW25125K10JNEGHP be used in place of the 1W-rated ERJ-S1TJ512U? A: Yes. The 1.5W rating of CRCW25125K10JNEGHP is a superset of the 1W requirement. This part is a direct functional substitute with enhanced thermal capability and is suitable for any application designed for the ERJ-S1TJ512U.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message