ERJ-S1TJ360U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TJ360U is a 36 Ohm ±5% 1W thick film chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently in active production status with 677 pieces available in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when enhanced performance characteristics such as higher power ratings are needed for specific circuit requirements.

Substiute Parts

ERJ-S1TJ360U

Panasonic Electronic ComponentsIn Stock: 750ERJ-S1TJ360U Datasheet

Current PartRFQ

ERJ-1TYJ360U

Panasonic Electronic ComponentsIn Stock: 9237ERJ-1TYJ360U Datasheet

SimilarRFQ

CRCW251236R0JNEG

Vishay DaleIn Stock: 2799CRCW251236R0JNEG Datasheet

SimilarRFQ

CRCW251236R0JNEGHP

Vishay DaleIn Stock: 2754CRCW251236R0JNEGHP Datasheet

SimilarRFQ

RMCF2512JT36R0

Stackpole Electronics IncIn Stock: 11457RMCF2512JT36R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TJ360U is determined by the following critical parameters:

• Resistance value: 36 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Package / Case: 2512 (6432 Metric) (exact match required)
• Power rating: 1W minimum (equal or higher acceptable)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match or wider range acceptable)
• Automotive rating: AEC-Q200 (required for automotive applications)
• Composition: Thick Film (exact match required)
• RoHS compliance: ROHS3 Compliant (required)

Substitute parts are grouped into two categories: direct equivalents (identical specifications) and functional equivalents (higher power rating with identical electrical characteristics).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Identical Specifications):

CRCW251236R0JNEG (Vishay Dale) and RMCF2512JT36R0 (Stackpole Electronics) are direct functional equivalents to the ERJ-S1TJ360U. Both parts maintain identical electrical specifications, package dimensions, and automotive AEC-Q200 certification. RMCF2512JT36R0 is supplied in Cut Tape (CT) format, while CRCW251236R0JNEG is supplied in Tape & Reel (TR) format. Both are in active production status.

Enhanced Performance Alternative:

CRCW251236R0JNEGHP (Vishay Dale) provides a 1.5W power rating compared to the 1W rating of the primary part, while maintaining all other electrical and mechanical specifications. This part includes pulse withstanding capability and is suitable for applications requiring higher transient power dissipation. This part is in active production status.

Legacy Alternative:

ERJ-1TYJ360U (Panasonic Electronic Components) is a direct electrical equivalent but carries a "Not For New Designs" product status. This part should be used only when existing inventory must be maintained or when legacy system compatibility is required.

Frequently Asked Questions (FAQ)

Q: Can CRCW251236R0JNEGHP be used as a direct replacement for ERJ-S1TJ360U?

A: Yes. CRCW251236R0JNEGHP meets all electrical and mechanical requirements of the ERJ-S1TJ360U. The higher 1.5W power rating provides additional thermal margin and does not create compatibility issues in circuits designed for 1W operation.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel (TR) packaging is used for automated assembly processes with reel-based component feeders. Cut Tape (CT) packaging is supplied in individual tape strips without reels, suitable for manual assembly or lower-volume production. Both formats contain identical components.

Q: Why is ERJ-1TYJ360U marked as "Not For New Designs"?

A: This designation indicates that Panasonic has transitioned this part to end-of-life status. While the part remains functionally equivalent, it should not be selected for new circuit designs. Use active-status alternatives such as CRCW251236R0JNEG or RMCF2512JT36R0 for new applications.

Q: Are all substitute parts AEC-Q200 rated?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, meeting the same reliability and qualification standards as the primary part.

Q: Can I use a substitute part with different physical dimensions?

A: No. All substitute parts maintain identical 2512 (6432 Metric) package dimensions and footprints. Physical dimensions are critical for PCB layout compatibility and must not vary.