ERJ-S1TJ130U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TJ130U is a 13 Ohms ±5% 1W thick film chip resistor manufactured by Panasonic Electronic Components in the 2512 (6432 Metric) package. This component is rated for automotive applications under AEC-Q200 and features anti-sulfur construction for enhanced reliability in harsh environments. The part is currently in active production status.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative sourcing, or when supply chain optimization requires qualified alternatives from different manufacturers while maintaining identical electrical and mechanical performance.

Substiute Parts

ERJ-S1TJ130U

Panasonic Electronic ComponentsIn Stock: 1197ERJ-S1TJ130U Datasheet

Current PartRFQ

ERJ-1TYJ130U

Panasonic Electronic ComponentsIn Stock: 5298ERJ-1TYJ130U Datasheet

SimilarRFQ

CRCW251213R0JNEG

Vishay DaleIn Stock: 3451CRCW251213R0JNEG Datasheet

SimilarRFQ

RMCF2512JT13R0

Stackpole Electronics IncIn Stock: 8735RMCF2512JT13R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S1TJ130U are qualified based on the following criteria:

• Resistance value: 13 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power rating: 1W (exact match required)
• Package: 2512 (6432 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±200ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• Automotive rating: AEC-Q200 (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All substitute parts listed meet these criteria and are therefore electrically and mechanically interchangeable with the ERJ-S1TJ130U in applications requiring a 13 Ohm 1W 2512 thick film resistor with automotive-grade specifications.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S1TJ130U (Panasonic), CRCW251213R0JNEG (Vishay Dale), or RMCF2512JT13R0 (Stackpole Electronics Inc). All three are currently in active production and carry full AEC-Q200 automotive qualification with ROHS3 compliance.

The ERJ-1TYJ130U (Panasonic) carries a "Not For New Designs" status and should be used only for legacy design maintenance or replacement of existing assemblies where continuity with original specifications is required.

All four parts are electrically and mechanically equivalent and meet identical compliance requirements for automotive applications operating across the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1TJ130U be replaced with ERJ-1TYJ130U in new designs?

A: No. ERJ-1TYJ130U carries a "Not For New Designs" status. For new designs, use ERJ-S1TJ130U, CRCW251213R0JNEG, or RMCF2512JT13R0.

Q: Are there any dimensional differences between these substitute parts?

A: The ERJ-S1TJ130U and RMCF2512JT13R0 have identical dimensions of 0.252" L x 0.126" W (6.40mm x 3.20mm). The CRCW251213R0JNEG has slightly different dimensions of 0.248" L x 0.124" W (6.30mm x 3.15mm). All three fit the 2512 package specification and are mechanically compatible in standard PCB layouts designed for 2512 components.

Q: Do all substitute parts have the same anti-sulfur or special features?

A: The ERJ-S1TJ130U specifically includes anti-sulfur construction. The substitute parts (ERJ-1TYJ130U, CRCW251213R0JNEG, RMCF2512JT13R0) are specified with standard automotive AEC-Q200 thick film construction. Verify anti-sulfur requirements with your application specifications before substitution.

Q: Are all parts RoHS3 compliant?

A: Yes. All four parts are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the difference between ERJ-S1TJ130U and ERJ-1TYJ130U series designations?

A: ERJ-S1TJ130U belongs to the ERJ-S1T series (current generation), while ERJ-1TYJ130U belongs to the ERJ-1T series (legacy). Both are Panasonic products with identical electrical specifications, but the ERJ-S1T series represents the current active product line.