ERJ-S1TJ102U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TJ102U is a 1 kOhms ±5% 1W thick film chip resistor manufactured by Panasonic Electronic Components in the 2512 (6432 Metric) package. This component is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently active in production with 1103 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand enhanced performance characteristics, or when supply chain optimization requires alternative sourcing from qualified manufacturers.

Key Parameters

Parameter	Value
Resistance	1 kOhms
Tolerance	±5%
Power Rating	1W
Package / Case	2512 (6432 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Direct Equivalents maintain identical electrical specifications: 1 kOhms resistance, ±5% tolerance, 1W power rating, 2512 package, thick film composition, ±200ppm/°C temperature coefficient, and -55°C to 155°C operating range. These parts are interchangeable without circuit redesign.

Upgraded Substitutes provide enhanced performance through increased power rating (1.5W or 2W) or additional features such as pulse withstanding capability or anti-sulfur protection. These parts are pin-compatible and functionally superior, suitable for applications requiring higher reliability margins.

Similar Substitutes maintain core electrical parameters but may exhibit minor variations in physical dimensions, temperature coefficient, or operating temperature limits. These parts are compatible within the specified tolerance band but require verification of mechanical fit and thermal performance in the target application.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Features	Product Status
ERJ-S1TJ102U	Panasonic Electronic Components	1 kOhms	±5%	1	±200	-55 ~ 155	Anti-Sulfur, Automotive AEC-Q200	Active
ERJ-1TYJ102U	Panasonic Electronic Components	1 kOhms	±5%	1	±200	-55 ~ 155	Automotive AEC-Q200	Not For New Designs
35201K0JT	TE Connectivity Passive Product	1 kOhms	±5%	1	±200	-55 ~ 125	—	Active
CR2512-JW-102ELF	Bourns Inc.	1 kOhms	±5%	1	±200	-55 ~ 155	—	Active
CRS2512AJW-102ELF	Bourns Inc.	1 kOhms	±5%	2	±200	-55 ~ 155	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	Active
CRCW25121K00JNEG	Vishay Dale	1 kOhms	±5%	1	±200	-55 ~ 155	Automotive AEC-Q200	Active
CRCW25121K00JNEGHP	Vishay Dale	1 kOhms	±5%	1.5	±200	-55 ~ 155	Automotive AEC-Q200, Pulse Withstanding	Active
CRM2512-JW-102ELF	Bourns Inc.	1 kOhms	±5%	2	±200	-55 ~ 155	Current Sense	Active
RMCF2512JT1K00	Stackpole Electronics Inc	1 kOhms	±5%	1	±200	-55 ~ 155	Automotive AEC-Q200	Active
SR2512JK-071KL	YAGEO	1 kOhms	±5%	1	±100	-55 ~ 155	Automotive AEC-Q200, Pulse Withstanding	Active

Engineering Selection Recommendations

For Direct Replacement: CR2512-JW-102ELF, CRCW25121K00JNEG, and RMCF2512JT1K00 are active production parts with identical electrical specifications and full operating temperature range matching the ERJ-S1TJ102U. All three are ROHS3 compliant with MSL 1 rating.

For Enhanced Reliability: CRS2512AJW-102ELF and CRCW25121K00JNEGHP provide increased power dissipation capability (2W and 1.5W respectively) while maintaining automotive AEC-Q200 certification. These upgrades are suitable for applications requiring higher thermal margins or pulse withstanding performance.

For Automotive Applications: All substitute parts listed carry AEC-Q200 automotive qualification except 35201K0JT. The ERJ-1TYJ102U, while electrically equivalent, carries "Not For New Designs" status and should not be selected for new product development.

Temperature Consideration: The 35201K0JT from TE Connectivity operates to 125°C maximum, which is 30°C below the ERJ-S1TJ102U specification. This part is suitable only for applications with maximum operating temperature not exceeding 125°C.

Frequently Asked Questions (FAQ)

Q: Can I use CRS2512AJW-102ELF as a direct replacement for ERJ-S1TJ102U?

A: Yes. CRS2512AJW-102ELF is pin-compatible and electrically equivalent. The 2W power rating provides additional thermal margin compared to the 1W specification of the original part. Both parts are ROHS3 compliant, AEC-Q200 rated, and operate across the full -55°C to 155°C temperature range.

Q: What is the difference between CRCW25121K00JNEG and CRCW25121K00JNEGHP?

A: Both parts are 1 kOhms ±5% resistors in the 2512 package from Vishay Dale. The CRCW25121K00JNEGHP variant has a 1.5W power rating and pulse withstanding capability, compared to 1W for the standard CRCW25121K00JNEG. The HP designation indicates enhanced performance for high-pulse applications.

Q: Why is ERJ-1TYJ102U marked "Not For New Designs"?

A: ERJ-1TYJ102U is a legacy Panasonic part that remains available but is not recommended for new product development. Active production alternatives from multiple manufacturers provide equivalent performance with current product status.

Q: Can I use 35201K0JT in a circuit designed for -55°C to 155°C operation?

A: No. The 35201K0JT from TE Connectivity has a maximum operating temperature of 125°C, which is below the upper limit of the ERJ-S1TJ102U specification. Use this part only in applications with maximum operating temperature not exceeding 125°C.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed in the substitute table are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance of the ERJ-S1TJ102U.

Q: What does "Current Sense" mean for the CRM2512-JW-102ELF?

A: Current sense resistors are designed for precision current measurement applications. The CRM2512-JW-102ELF maintains the same 1 kOhms ±5% specification but is optimized for low-noise current monitoring circuits. It is functionally compatible with standard applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message