Equivalent & Substitute Parts for ERJ-S1TF16R2U

Part Overview

The ERJ-S1TF16R2U is a 16.2 Ohms ±1% 1W chip resistor in 2512 (6432 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 686 units in stock.

Substitute parts become necessary when the primary part faces supply constraints, extended lead times, or when design flexibility permits selection from qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

ERJ-S1TF16R2U

Panasonic Electronic ComponentsIn Stock: 739ERJ-S1TF16R2U Datasheet

Current PartRFQ

ERJ-1TNF16R2U

Panasonic Electronic ComponentsIn Stock: 4907ERJ-1TNF16R2U Datasheet

SimilarRFQ

CRCW251216R2FKEG

Vishay DaleIn Stock: 5051CRCW251216R2FKEG Datasheet

SimilarRFQ

RMCF2512FT16R2

Stackpole Electronics IncIn Stock: 5351RMCF2512FT16R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TF16R2U is determined by strict equivalence across the following parameters:

• Resistance value: 16.2 Ohms
• Tolerance: ±1%
• Power rating: 1W
• Package: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All qualified substitutes maintain identical electrical performance and mechanical compatibility. Physical dimensions may vary within acceptable tolerances (length 6.30mm to 6.40mm, width 3.15mm to 3.20mm, height 0.70mm maximum).

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S1TF16R2U (Panasonic), CRCW251216R2FKEG (Vishay Dale), or RMCF2512FT16R2 (Stackpole). All three maintain full AEC-Q200 automotive qualification and ROHS3 compliance.

ERJ-1TNF16R2U carries "Not For New Designs" status and should be used only for legacy design maintenance or when existing supply chains require continuity with established part numbers.

All four parts are electrically and mechanically interchangeable within the specified parameter tolerances. Selection may be based on supplier availability, lead time, packaging preference (Tape & Reel or Cut Tape), or established procurement relationships.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1TF16R2U be directly replaced with ERJ-1TNF16R2U?

A: Yes, electrical and mechanical compatibility is complete. However, ERJ-1TNF16R2U is designated "Not For New Designs." Use this substitute only for legacy applications or when supply of the primary part is unavailable.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within acceptable tolerances. Length ranges from 6.30mm to 6.40mm, width from 3.15mm to 3.20mm. All parts maintain 0.70mm maximum seated height. These variations do not affect PCB layout or assembly compatibility.

Q: Do all substitutes maintain automotive AEC-Q200 qualification?

A: Yes. All four parts listed carry AEC-Q200 automotive qualification and are suitable for automotive and high-reliability industrial applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain identical components. Tape & Reel packaging is optimized for automated assembly lines. Cut Tape packaging is suitable for manual assembly or lower-volume production. Selection depends on manufacturing process requirements.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed parts meet ROHS3 compliance requirements and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. All parts share identical 2512 (6432 Metric) package dimensions and electrical specifications. No PCB layout modifications are required for substitution.