ERJ-S1TF16R0U Equivalent & Substitute Parts

Part Overview

The ERJ-S1TF16R0U is a 16 Ohm ±1% 1W thick film chip resistor manufactured by Panasonic Electronic Components in the 2512 (6432 Metric) package. This component is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently active in production with 747 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory compliance can be maintained across alternative manufacturers.

Substiute Parts

ERJ-S1TF16R0U

Panasonic Electronic ComponentsIn Stock: 820ERJ-S1TF16R0U Datasheet

Current PartRFQ

CRCW251216R0FKEGHP

Vishay DaleIn Stock: 2462CRCW251216R0FKEGHP Datasheet

SimilarRFQ

RC2512FK-0716RL

YAGEOIn Stock: 13589RC2512FK-0716RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1TF16R0U is determined by the following criteria:

• Resistance value: 16 Ohms
• Tolerance: ±1%
• Package: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Power rating may vary within acceptable limits for the application. Automotive AEC-Q200 certification is maintained across all identified substitutes. All substitute parts meet the dimensional and electrical requirements for direct replacement in the 2512 package footprint.

Parameter Comparison

Engineering Selection Recommendations

CRCW251216R0FKEGHP (Vishay Dale) is suitable as a substitute where higher power dissipation capability is acceptable. This part maintains AEC-Q200 automotive certification, ROHS3 compliance, and identical electrical specifications with a 1.5W power rating versus the original 1W specification.

RC2512FK-0716RL (YAGEO) is suitable as a substitute where moisture-resistant thick film composition is required. This part matches the 1W power rating and all electrical specifications of the original part. Automotive AEC-Q200 certification is not specified for this part; verification against application requirements is necessary if automotive qualification is mandatory.

All substitute parts maintain the 2512 package footprint with dimensional variations within acceptable PCB assembly tolerances.

Frequently Asked Questions (FAQ)

Q: Can CRCW251216R0FKEGHP replace ERJ-S1TF16R0U in all applications?

A: CRCW251216R0FKEGHP maintains identical electrical specifications (16 Ohms ±1%, ±100ppm/°C, -55°C ~ 155°C) and package dimensions. The 1.5W power rating exceeds the original 1W specification, making it suitable for applications where the original 1W rating is sufficient. Both parts carry AEC-Q200 automotive certification and ROHS3 compliance.

Q: What is the difference between RC2512FK-0716RL and the original part?

A: RC2512FK-0716RL matches the 1W power rating and all electrical specifications of ERJ-S1TF16R0U. The primary difference is the moisture-resistant thick film composition feature. Automotive AEC-Q200 certification is not specified for this part. Dimensional variations are within standard PCB assembly tolerances.

Q: Are all substitute parts compatible with the 2512 package footprint?

A: Yes. All substitute parts use the 2512 (6432 Metric) package. Dimensional variations (length, width, height) are within acceptable PCB assembly tolerances for standard reflow soldering processes.

Q: Do all substitute parts meet RoHS compliance requirements?

A: Yes. All listed substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the original part specifications.

Q: Which substitute part should be selected for automotive applications requiring AEC-Q200 certification?

A: CRCW251216R0FKEGHP maintains AEC-Q200 automotive certification. RC2512FK-0716RL does not specify AEC-Q200 certification and requires verification against application requirements if automotive qualification is mandatory.