ERJ-S1DJ623U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DJ623U is a 62 kOhms ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status. Substitute parts may be required due to inventory constraints, supply chain disruptions, or design phase transitions where legacy series components are no longer recommended for new designs.

Substiute Parts

ERJ-S1DJ623U

Panasonic Electronic ComponentsIn Stock: 1069ERJ-S1DJ623U Datasheet

Current PartRFQ

ERJ-12ZYJ623U

Panasonic Electronic ComponentsIn Stock: 854ERJ-12ZYJ623U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERJ-12ZYJ623U qualifies as a direct substitute for the ERJ-S1DJ623U based on the following critical parameters:

• Identical resistance value: 62 kOhms
• Identical tolerance: ±5%
• Identical power rating: 0.75W
• Identical package: 2010 (5025 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive qualification: AEC-Q200
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)

The primary distinction is product status: ERJ-S1DJ623U is Active, while ERJ-12ZYJ623U is Not For New Designs. This classification reflects manufacturing lifecycle positioning rather than electrical or mechanical incompatibility.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-12ZYJ623U is electrically and mechanically equivalent to the ERJ-S1DJ623U. Both parts meet AEC-Q200 automotive qualification and ROHS3 compliance requirements. Selection between these parts should be based on:

• Availability and lead time requirements
• Design phase: ERJ-S1DJ623U is recommended for new designs due to Active status
• Existing inventory: ERJ-12ZYJ623U may be used in legacy or maintenance applications where stock exists
• Supply chain constraints: Either part satisfies all electrical and mechanical requirements for direct substitution

Frequently Asked Questions (FAQ)

Q: Can ERJ-12ZYJ623U replace ERJ-S1DJ623U in new designs? A: Electrically and mechanically, yes. However, ERJ-S1DJ623U is the recommended choice for new designs due to its Active product status. ERJ-12ZYJ623U is classified as Not For New Designs.

Q: Are the physical dimensions identical? A: Yes. Both parts are 2010 (5025 Metric) package with identical length (0.197" / 5.00mm), width (0.098" / 2.50mm), and maximum seated height (0.028" / 0.70mm).

Q: Do both parts meet automotive standards? A: Yes. Both ERJ-S1DJ623U and ERJ-12ZYJ623U carry AEC-Q200 qualification for automotive applications.

Q: What is the difference between these two part numbers? A: The parts are functionally identical in all electrical and mechanical parameters. The primary difference is manufacturing lifecycle status: ERJ-S1DJ623U is Active, while ERJ-12ZYJ623U is Not For New Designs.

Q: Are both parts RoHS compliant? A: Yes. Both parts are ROHS3 Compliant with identical moisture sensitivity level (MSL 1 - Unlimited).

Q: Can these parts be used interchangeably on PCBs? A: Yes. Identical package, footprint, and electrical characteristics allow direct PCB substitution without layout or schematic modifications.