ERJ-S1DJ560U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DJ560U is a 56 Ohm ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard with anti-sulfur coating and operates across -55°C to 155°C. The part is currently in active production status. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or design flexibility while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S1DJ560U

Panasonic Electronic ComponentsIn Stock: 1073ERJ-S1DJ560U Datasheet

Current PartRFQ

ERJ-12ZYJ560U

Panasonic Electronic ComponentsIn Stock: 7323ERJ-12ZYJ560U Datasheet

SimilarRFQ

CRCW201056R0JNEF

Vishay DaleIn Stock: 3939CRCW201056R0JNEF Datasheet

SimilarRFQ

RMCF2010JT56R0

Stackpole Electronics IncIn Stock: 1129RMCF2010JT56R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DJ560U is determined by strict equivalence across the following parameters: resistance value (56 Ohms), tolerance (±5%), power rating (0.75W), package type (2010 / 5025 Metric), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 certification. All identified substitute parts meet these criteria without exception. Substitutes are grouped by manufacturer while maintaining identical electrical performance and mechanical compatibility. Packaging format (Tape & Reel) and compliance certifications (ROHS3, REACH Unaffected, EAR99) are consistent across all alternatives.

Parameter Comparison

Engineering Selection Recommendations

For new designs, CRCW201056R0JNEF (Vishay Dale) and RMCF2010JT56R0 (Stackpole Electronics Inc) are preferred as both maintain active production status. The primary part ERJ-S1DJ560U remains the baseline reference and is actively manufactured by Panasonic Electronic Components. ERJ-12ZYJ560U, while electrically and mechanically identical, carries "Not For New Designs" status and should be reserved for legacy system maintenance or existing inventory utilization only. All four parts satisfy AEC-Q200 automotive qualification, ROHS3 compliance, and identical thermal and electrical performance specifications. Selection between active alternatives depends on supply chain availability, lead time requirements, and established vendor relationships.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12ZYJ560U replace ERJ-S1DJ560U in new designs? A: No. ERJ-12ZYJ560U carries "Not For New Designs" status. Use CRCW201056R0JNEF or RMCF2010JT56R0 for new applications.

Q: Are all substitute parts mechanically compatible with the 2010 package footprint? A: Yes. All substitute parts use identical 2010 (5025 Metric) package dimensions: 0.197" L × 0.098" W (5.00mm × 2.50mm) with 0.028" (0.70mm) maximum seated height.

Q: Do substitute parts maintain the same electrical performance? A: Yes. All substitutes provide 56 Ohms ±5% at 0.75W with ±200ppm/°C temperature coefficient across -55°C to 155°C operating range.

Q: Are all parts automotive-qualified? A: Yes. All listed parts meet AEC-Q200 automotive qualification standard.

Q: What is the difference between ERJ-S1DJ560U and ERJ-12ZYJ560U? A: Both are Panasonic products with identical electrical and mechanical specifications. The primary difference is product lifecycle status: ERJ-S1DJ560U is active for new designs, while ERJ-12ZYJ560U is designated "Not For New Designs."

Q: Can I mix different manufacturers in the same assembly? A: Yes. All substitute parts meet identical specifications and certifications, allowing cross-manufacturer use within the same design.

Q: Are all parts available in Tape & Reel packaging? A: Yes. All listed parts are supplied in Tape & Reel (TR) format for automated assembly.