ERJ-S1DJ360U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DJ360U is a 36 Ohm ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard and features anti-sulfur coating for enhanced reliability in harsh environments. The part is currently in active production status with 1071 units available in inventory.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative sourcing, or when supply chain optimization requires qualified alternatives from different manufacturers while maintaining identical electrical and mechanical performance.

Substiute Parts

ERJ-S1DJ360U

Panasonic Electronic ComponentsIn Stock: 1099ERJ-S1DJ360U Datasheet

Current PartRFQ

ERJ-12ZYJ360U

Panasonic Electronic ComponentsIn Stock: 5037ERJ-12ZYJ360U Datasheet

SimilarRFQ

CRCW201036R0JNEF

Vishay DaleIn Stock: 3552CRCW201036R0JNEF Datasheet

SimilarRFQ

RMCF2010JT36R0

Stackpole Electronics IncIn Stock: 12735RMCF2010JT36R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DJ360U is determined by strict equivalence across the following critical parameters:

• Resistance value: 36 Ohms
• Tolerance: ±5%
• Power rating: 0.75W
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3
• Moisture sensitivity: MSL 1

All qualified substitute parts listed below meet these parameters without exception. Substitution is valid across manufacturers when all electrical and mechanical specifications are identical.

Parameter Comparison

Engineering Selection Recommendations

All four parts listed are electrically and mechanically equivalent and meet identical specifications for automotive applications. Selection should be based on the following factors:

For new designs, prioritize parts with Active product status: ERJ-S1DJ360U (Panasonic), CRCW201036R0JNEF (Vishay Dale), and RMCF2010JT36R0 (Stackpole). The ERJ-12ZYJ360U carries a "Not For New Designs" status and should be used only for legacy design maintenance or existing production continuity.

Inventory availability varies significantly across manufacturers. RMCF2010JT36R0 offers the highest stock level at 12,695 units, followed by ERJ-12ZYJ360U at 4,956 units and CRCW201036R0JNEF at 3,494 units. The primary part ERJ-S1DJ360U maintains 1,071 units in stock.

All parts carry ROHS3 compliance and AEC-Q200 automotive qualification, ensuring suitability for regulated automotive environments. Moisture sensitivity level 1 (unlimited) indicates no special storage or handling requirements for any substitute.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12ZYJ360U be used as a direct replacement for ERJ-S1DJ360U in new designs?

A: No. While ERJ-12ZYJ360U is electrically and mechanically equivalent, it carries a "Not For New Designs" status. Use this part only for legacy design maintenance or existing production continuity. For new designs, select from parts with Active status: ERJ-S1DJ360U, CRCW201036R0JNEF, or RMCF2010JT36R0.

Q: Are all substitute parts suitable for automotive applications?

A: Yes. All listed parts carry AEC-Q200 automotive qualification and operate across the identical temperature range of -55°C to 155°C, meeting automotive reliability standards.

Q: What determines if a part can substitute for ERJ-S1DJ360U?

A: Substitution requires exact equivalence across resistance (36 Ohms), tolerance (±5%), power rating (0.75W), package (2010), composition (thick film), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and compliance certifications (AEC-Q200, ROHS3, MSL 1).

Q: Do substitute parts require different PCB footprints?

A: No. All substitute parts use the identical 2010 (5025 Metric) package with matching dimensions (0.197" L × 0.098" W, 5.00mm × 2.50mm) and height (0.028" maximum seated height). PCB footprints are interchangeable.

Q: Which substitute offers the best supply availability?

A: RMCF2010JT36R0 from Stackpole Electronics offers the highest current inventory at 12,695 units, providing the strongest supply position for immediate procurement needs.

Q: Are there any differences in anti-sulfur coating between manufacturers?

A: The primary part ERJ-S1DJ360U explicitly includes anti-sulfur coating. The substitute parts do not list this feature in their specifications. For applications requiring anti-sulfur protection, ERJ-S1DJ360U remains the specified choice.