Equivalent & Substitute Parts for ERJ-S1DJ151U

Part Overview

The ERJ-S1DJ151U is a 150 Ohm ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 849 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative qualified sources while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	150 Ohms
Tolerance	±5%
Power Rating	0.75W (3/4W)
Package / Case	2010 (5025 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Terminations	2
Physical Dimensions	0.197" L x 0.098" W (5.00mm x 2.50mm)
Height - Seated (Max)	0.028" (0.70mm)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DJ151U is determined by strict equivalence across the following critical parameters:

Resistance value: 150 Ohms
Tolerance: ±5%
Power rating: 0.75W (3/4W)
Package type: 2010 (5025 Metric)
Composition: Thick Film
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
Automotive qualification: AEC-Q200
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts listed below meet these parameters without exception. Substitution is valid across manufacturers when all electrical and mechanical specifications align with the primary part.

Parameter Comparison

Parameter	ERJ-S1DJ151U (Panasonic)	ERJ-12ZYJ151U (Panasonic)	CRCW2010150RJNEF (Vishay Dale)	RMCF2010JT150R (Stackpole)
Resistance	150 Ohms	150 Ohms	150 Ohms	150 Ohms
Tolerance	±5%	±5%	±5%	±5%
Power Rating	0.75W	0.75W	0.75W	0.75W
Package / Case	2010 (5025 Metric)	2010 (5025 Metric)	2010 (5025 Metric)	2010 (5025 Metric)
Composition	Thick Film	Thick Film	Thick Film	Thick Film
Temperature Coefficient	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C
Operating Temperature	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C	-55°C ~ 155°C
AEC-Q200 Rating	Yes	Yes	Yes	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Physical Dimensions	5.00mm x 2.50mm	5.00mm x 2.50mm	5.00mm x 2.50mm	5.00mm x 2.50mm
Height - Seated (Max)	0.70mm	0.70mm	0.70mm	0.70mm
Product Status	Active	Not For New Designs	Active	Active

Engineering Selection Recommendations

Primary Selection (Active Status): The ERJ-S1DJ151U remains the recommended choice for new designs due to its active production status and anti-sulfur feature specification. Current inventory of 849 units supports immediate availability.

Secondary Selection (Active Status): CRCW2010150RJNEF (Vishay Dale) and RMCF2010JT150R (Stackpole Electronics) are both active production parts meeting all electrical and mechanical specifications. These alternatives provide supply chain diversity and are suitable for new designs. CRCW2010150RJNEF has 4,950 units in stock; RMCF2010JT150R has 28,488 units in stock.

Legacy Compatibility (Not For New Designs): ERJ-12ZYJ151U (Panasonic) is marked "Not For New Designs" and should be used only for replacement or repair of existing assemblies. This part maintains full electrical and mechanical compatibility but is in legacy status. Inventory of 20,234 units is available.

All listed parts carry AEC-Q200 automotive qualification and ROHS3 compliance, ensuring suitability for regulated automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1DJ151U be directly replaced with ERJ-12ZYJ151U? A: Yes, electrical and mechanical compatibility is complete. However, ERJ-12ZYJ151U is marked "Not For New Designs." Use this substitute only for repair or replacement of existing assemblies.

Q: Are cross-manufacturer substitutes (Vishay Dale, Stackpole) electrically equivalent? A: Yes. CRCW2010150RJNEF and RMCF2010JT150R meet all specified electrical parameters: 150 Ohms ±5%, 0.75W power rating, ±200ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. Both carry AEC-Q200 qualification.

Q: What is the significance of the 2010 package designation? A: The 2010 (5025 Metric) package is a standardized SMD resistor footprint measuring 5.00mm x 2.50mm with 0.70mm maximum seated height. All listed substitutes use this identical package, ensuring PCB layout compatibility without modification.

Q: Does the anti-sulfur feature of ERJ-S1DJ151U affect substitution? A: The anti-sulfur specification is a feature of the ERJ-S1DJ151U and ERJ-12ZYJ151U series. Vishay Dale CRCW2010150RJNEF and Stackpole RMCF2010JT150R do not explicitly list anti-sulfur coating. For applications requiring sulfur resistance, confirm with the application requirements before substituting.

Q: Are all listed parts RoHS3 compliant? A: Yes. All four parts carry ROHS3 Compliant status and are suitable for applications requiring RoHS compliance.

Q: What is MSL 1 (Unlimited) moisture sensitivity? A: MSL 1 indicates the lowest moisture sensitivity level. These parts require no special moisture control during storage, handling, or assembly, providing maximum flexibility in manufacturing environments.

Q: Which substitute offers the best inventory availability? A: RMCF2010JT150R (Stackpole) has the highest inventory at 28,488 units, followed by ERJ-12ZYJ151U (Panasonic) at 20,234 units. For active production designs, RMCF2010JT150R or CRCW2010150RJNEF are recommended.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message