ERJ-S1DJ130U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DJ130U is a 13 Ohm ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This component is rated for automotive applications under AEC-Q200 standard and features anti-sulfur coating for enhanced reliability in harsh environments. The part is currently in active production status. Substitute parts may be required due to supply chain constraints, design revisions, or inventory availability while maintaining equivalent electrical and mechanical performance.

Substiute Parts

ERJ-S1DJ130U

Panasonic Electronic ComponentsIn Stock: 1062ERJ-S1DJ130U Datasheet

Current PartRFQ

ERJ-12ZYJ130U

Panasonic Electronic ComponentsIn Stock: 11248ERJ-12ZYJ130U Datasheet

SimilarRFQ

CRCW201013R0JNEF

Vishay DaleIn Stock: 8750CRCW201013R0JNEF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S1DJ130U are qualified based on the following criteria:

• Identical resistance value: 13 Ohms
• Identical tolerance: ±5%
• Identical power rating: 0.75W
• Identical package: 2010 (5025 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical automotive certification: AEC-Q200
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)

All substitute parts listed meet these electrical and mechanical specifications, ensuring direct functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-S1DJ130U (Panasonic, Active status) and CRCW201013R0JNEF (Vishay Dale, Active status) are both suitable for new designs. Both parts maintain full AEC-Q200 automotive qualification and ROHS3 compliance.

The ERJ-12ZYJ130U (Panasonic) carries a "Not For New Designs" status and should be used only in legacy applications or when existing inventory must be consumed. This part remains electrically and mechanically equivalent but is not recommended for new product development.

All three parts are certified for automotive applications and meet identical electrical specifications, making them interchangeable at the circuit level when package constraints and supply availability are considered.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12ZYJ130U be used as a direct replacement for ERJ-S1DJ130U?

A: Yes, electrically and mechanically. However, ERJ-12ZYJ130U carries "Not For New Designs" status. Use only for legacy applications or inventory management purposes.

Q: Is CRCW201013R0JNEF from Vishay Dale compatible with the Panasonic ERJ-S1DJ130U?

A: Yes. Both parts share identical electrical parameters (13 Ohms ±5%, 0.75W), package dimensions (2010/5025 Metric), temperature characteristics, and AEC-Q200 automotive certification. They are functionally interchangeable.

Q: What determines substitutability for this resistor?

A: Substitutability is determined by matching resistance value, tolerance, power rating, package type, composition, temperature coefficient, operating temperature range, and automotive certifications. All listed substitutes meet these criteria.

Q: Are there any differences in anti-sulfur coating between ERJ-S1DJ130U and ERJ-12ZYJ130U?

A: ERJ-S1DJ130U explicitly includes anti-sulfur coating. ERJ-12ZYJ130U does not list this feature in its specification. Both maintain equivalent electrical performance and AEC-Q200 rating.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes, all listed parts carry AEC-Q200 certification and operate across the identical temperature range (-55°C ~ 155°C). They are suitable for automotive circuit applications where the specified electrical and thermal parameters are required.