ERJ-S1DJ114U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DJ114U is a 110 kOhms ±5% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and automotive qualification requirements.

Substiute Parts

ERJ-S1DJ114U

Panasonic Electronic ComponentsIn Stock: 683ERJ-S1DJ114U Datasheet

Current PartRFQ

ERJ-12ZYJ114U

Panasonic Electronic ComponentsIn Stock: 1125ERJ-12ZYJ114U Datasheet

SimilarRFQ

RMCF2010JT110K

Stackpole Electronics IncIn Stock: 4690RMCF2010JT110K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S1DJ114U are qualified based on the following criteria:

• Resistance value: 110 kOhms
• Tolerance: ±5%
• Power rating: 0.75W (3/4W)
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

All identified substitutes match these parameters across different manufacturers, ensuring direct functional and mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-S1DJ114U is the primary selection for new designs, maintaining active production status with full automotive AEC-Q200 qualification and anti-sulfur coating. The RMCF2010JT110K from Stackpole Electronics Inc is an equivalent alternative for active designs, offering identical electrical and mechanical specifications with current production status. The ERJ-12ZYJ114U, while electrically and mechanically compatible, carries a "Not For New Designs" status and should be reserved for legacy system maintenance or replacement applications only. All three parts satisfy identical compliance requirements including ROHS3 and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12ZYJ114U be used as a direct replacement for ERJ-S1DJ114U?

A: Electrically and mechanically, yes. However, ERJ-12ZYJ114U is marked "Not For New Designs." For new circuit designs, use ERJ-S1DJ114U or RMCF2010JT110K.

Q: Are all three parts mechanically interchangeable?

A: Yes. All parts share identical 2010 (5025 Metric) package dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm) with maximum seated height of 0.028" (0.70mm).

Q: Do all substitutes meet automotive qualification requirements?

A: Yes. All three parts carry AEC-Q200 automotive qualification and operate across -55°C ~ 155°C temperature range.

Q: What is the difference between ERJ-S1DJ114U and ERJ-12ZYJ114U?

A: Both are Panasonic 110 kOhms ±5% 0.75W 2010 resistors with identical electrical specifications. The primary difference is product status: ERJ-S1DJ114U is active for new designs, while ERJ-12ZYJ114U is not recommended for new designs.

Q: Is RMCF2010JT110K from a different manufacturer compatible?

A: Yes. RMCF2010JT110K from Stackpole Electronics Inc meets all electrical, mechanical, and compliance specifications identical to the Panasonic parts and is suitable for new designs.

Q: Are moisture sensitivity levels the same across all parts?

A: Yes. All three parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.