Equivalent & Substitute Parts for ERJ-S1DF75R0U

Part Overview

The ERJ-S1DF75R0U is a 75 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 2010 (5025 Metric) package format with 0.75W power rating. This component is rated for automotive applications under AEC-Q200 and features anti-sulfur construction for enhanced reliability in harsh environments. The part is currently in active production status with 955 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate alternative suppliers for supply chain resilience, or when specific feature enhancements such as moisture resistance are required for particular application environments.

Key Parameters

Parameter	Value
Resistance	75 Ohms
Tolerance	±1%
Power Rating	0.75W (3/4W)
Package / Case	2010 (5025 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DF75R0U is determined by strict equivalence across the following parameters:

Resistance value: 75 Ohms
Tolerance: ±1%
Power rating: 0.75W
Package format: 2010 (5025 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Moisture Sensitivity Level: 1 (Unlimited)
RoHS compliance: ROHS3 Compliant

All identified substitute parts meet these core electrical and mechanical parameters. Variations in secondary features such as anti-sulfur construction, moisture resistance enhancement, or product status do not disqualify substitution but are noted for application-specific considerations.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Product Status	Inventory (Pcs)
ERJ-S1DF75R0U	Panasonic	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	Yes	Active	955
ERJ-12SF75R0U	Panasonic	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs	3128
AC2010FK-0775RL	YAGEO	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	Yes	Active	8941
CRCW201075R0FKEF	Vishay Dale	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	Yes	Active	8300
RC2010FK-0775RL	YAGEO	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	No	Active	14806
RMCF2010FT75R0	Stackpole Electronics Inc	75 Ω	±1%	0.75	2010	±100ppm/°C	-55°C ~ 155°C	Yes	Active	7945

Engineering Selection Recommendations

For applications requiring AEC-Q200 automotive qualification, the following parts are recommended as primary substitutes: AC2010FK-0775RL (YAGEO), CRCW201075R0FKEF (Vishay Dale), and RMCF2010FT75R0 (Stackpole Electronics Inc). All three maintain active production status and full automotive compliance.

The ERJ-12SF75R0U (Panasonic) is electrically and mechanically equivalent but carries a "Not For New Designs" status, making it suitable only for legacy system maintenance or replacement applications where design continuity is required.

The RC2010FK-0775RL (YAGEO) meets all core electrical and mechanical parameters but does not carry AEC-Q200 automotive rating. This part is suitable for non-automotive applications or general-purpose industrial use where automotive qualification is not mandated.

For applications in moisture-prone environments, AC2010FK-0775RL and RC2010FK-0775RL both feature moisture-resistant construction as an enhancement over the base specification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12SF75R0U be used as a direct replacement for ERJ-S1DF75R0U?

A: Yes, ERJ-12SF75R0U is electrically and mechanically equivalent. However, it is designated "Not For New Designs" by Panasonic. Use this part only for maintenance of existing systems or when design continuity with legacy components is required.

Q: Which substitute parts maintain full AEC-Q200 automotive compliance?

A: AC2010FK-0775RL, CRCW201075R0FKEF, and RMCF2010FT75R0 all carry AEC-Q200 rating. ERJ-12SF75R0U also maintains this rating despite its legacy status. RC2010FK-0775RL does not include AEC-Q200 qualification.

Q: Are there dimensional differences between substitute parts?

A: All parts use the 2010 (5025 Metric) package with identical length and width of 0.197" × 0.098" (5.00mm × 2.50mm). Height variation exists: Panasonic and Vishay Dale parts measure 0.028" (0.70mm) maximum seated height, while YAGEO parts measure 0.026" (0.65mm) maximum. These variations fall within standard PCB assembly tolerances and do not affect interchangeability.

Q: What is the difference between anti-sulfur and moisture-resistant construction?

A: Anti-sulfur construction (ERJ-S1DF75R0U) protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant construction (AC2010FK-0775RL, RC2010FK-0775RL) provides enhanced protection in high-humidity or condensation-prone applications. These are distinct protective features addressing different environmental stressors.

Q: Can RC2010FK-0775RL be used in automotive applications?

A: RC2010FK-0775RL meets all electrical and mechanical specifications but lacks AEC-Q200 automotive qualification. Use this part only in non-automotive applications or where automotive qualification is not a design requirement.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the primary part specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message