ERJ-S1DF6190U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DF6190U is a 619 Ohm ±1% thick film chip resistor rated at 0.75W in a 2010 (5025 Metric) surface mount package. Manufactured by Panasonic Electronic Components, this part is qualified to AEC-Q200 automotive standards with anti-sulfur coating and operates across -55°C to 155°C. The part maintains Active product status with 1029 units in current inventory.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits equivalent alternatives from qualified manufacturers. All substitute parts listed maintain identical electrical specifications and package dimensions while meeting the same automotive qualification requirements.

Substiute Parts

ERJ-S1DF6190U

Panasonic Electronic ComponentsIn Stock: 1070ERJ-S1DF6190U Datasheet

Current PartRFQ

ERJ-12SF6190U

Panasonic Electronic ComponentsIn Stock: 4845ERJ-12SF6190U Datasheet

SimilarRFQ

AC2010FK-07619RL

YAGEOIn Stock: 3479AC2010FK-07619RL Datasheet

SimilarRFQ

CRCW2010619RFKEF

Vishay DaleIn Stock: 3140CRCW2010619RFKEF Datasheet

SimilarRFQ

RMCF2010FT619R

Stackpole Electronics IncIn Stock: 1467RMCF2010FT619R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 619 Ohms
• Tolerance: ±1%
• Power rating: 0.75W
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3
• Moisture sensitivity: MSL 1

All four substitute parts meet these criteria. Differences in product status, inventory levels, and minor physical variations (seated height) do not affect electrical or mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

All five parts are electrically and mechanically equivalent for direct substitution in 619 Ohm ±1% 0.75W 2010 package applications requiring AEC-Q200 automotive qualification.

For new designs, prioritize parts with Active product status: ERJ-S1DF6190U (Panasonic), AC2010FK-07619RL (YAGEO), CRCW2010619RFKEF (Vishay Dale), and RMCF2010FT619R (Stackpole Electronics). The ERJ-12SF6190U carries "Not For New Designs" status and should be reserved for legacy design maintenance or when other options are unavailable.

Selection among Active parts may be based on supplier availability, lead time, inventory levels, and established procurement relationships. All parts maintain identical compliance certifications (ROHS3, AEC-Q200, REACH Unaffected, EAR99).

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1DF6190U be replaced with ERJ-12SF6190U in new designs?

A: No. ERJ-12SF6190U carries "Not For New Designs" status. Use AC2010FK-07619RL, CRCW2010619RFKEF, or RMCF2010FT619R for new applications.

Q: Are all substitute parts qualified to the same automotive standard?

A: Yes. All five parts are AEC-Q200 qualified and operate across -55°C to 155°C with ±100ppm/°C temperature coefficient.

Q: Do the substitute parts fit the same PCB footprint?

A: Yes. All parts use the 2010 (5025 Metric) package with identical length (0.197" / 5.00mm) and width (0.098" / 2.50mm). Seated height varies slightly (0.026" to 0.028") but remains within standard PCB assembly tolerances.

Q: Which substitute offers the best inventory availability?

A: ERJ-12SF6190U has the highest inventory (4745 pcs), followed by AC2010FK-07619RL (3407 pcs) and CRCW2010619RFKEF (3039 pcs). For new designs, AC2010FK-07619RL or CRCW2010619RFKEF are preferred alternatives.

Q: Are all parts RoHS compliant?

A: Yes. All five parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.