Equivalent & Substitute Parts for ERJ-S1DF3600U

Part Overview

The ERJ-S1DF3600U is a 360 Ohms ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur properties and automotive AEC-Q200 qualification, making it suitable for demanding automotive and industrial applications. The part is currently active in production with 761 pieces available in stock.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit designs without functional compromise.

Substiute Parts

ERJ-S1DF3600U

Panasonic Electronic ComponentsIn Stock: 840ERJ-S1DF3600U Datasheet

Current PartRFQ

RC2010FK-07360RL

YAGEOIn Stock: 8655RC2010FK-07360RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DF3600U is determined by strict alignment of the following parameters:

• Resistance value: 360 Ohms
• Tolerance: ±1%
• Power rating: 0.75W (3/4W)
• Package: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

The RC2010FK-07360RL from YAGEO meets all these criteria and qualifies as a direct substitute. Both parts share identical electrical specifications, package dimensions, and environmental compliance ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S1DF3600U and RC2010FK-07360RL are active production parts with ROHS3 compliance and MSL 1 rating. The primary distinction lies in application-specific features: the Panasonic ERJ-S1DF3600U includes AEC-Q200 automotive qualification and anti-sulfur properties, while the YAGEO RC2010FK-07360RL features moisture-resistant construction.

Selection between these parts should be based on application requirements. For automotive and high-reliability applications requiring AEC-Q200 certification, the ERJ-S1DF3600U is the specified choice. For general industrial and consumer applications where moisture resistance is prioritized, the RC2010FK-07360RL provides equivalent electrical performance.

The marginal difference in seated height (0.70mm versus 0.65mm) is within typical PCB design tolerances for 2010 package components and does not affect functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can RC2010FK-07360RL replace ERJ-S1DF3600U in automotive applications?

A: Both parts meet the same electrical specifications and RoHS compliance. However, the ERJ-S1DF3600U carries AEC-Q200 automotive qualification and anti-sulfur properties. Use RC2010FK-07360RL only if your application does not require explicit AEC-Q200 certification.

Q: Are the package dimensions identical?

A: Both parts use the 2010 (5025 Metric) package with identical length and width (5.00mm x 2.50mm). The seated height differs slightly (0.70mm versus 0.65mm), which is within standard PCB design margins for this package class.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the ERJ-S1DF3600U and RC2010FK-07360RL carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints during storage or handling.

Q: What is the tolerance specification for both parts?

A: Both parts are specified at ±1% tolerance, ensuring equivalent resistance accuracy in circuit applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the ERJ-S1DF3600U and RC2010FK-07360RL are ROHS3 compliant and REACH unaffected.