ERJ-S1DF1692U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DF1692U is a 16.9 kOhms ±1% thick film chip resistor rated at 0.75W in a 2010 (5025 Metric) package. This component is manufactured by Panasonic Electronic Components and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 733 units in stock.

Finding equivalent and substitute parts becomes necessary when the primary part reaches end-of-life, experiences supply constraints, or when design requirements necessitate alternative sourcing options. The ERJ-S1DF1692U has documented substitutes within the Panasonic product line that maintain electrical and mechanical compatibility.

Substiute Parts

ERJ-S1DF1692U

Panasonic Electronic ComponentsIn Stock: 775ERJ-S1DF1692U Datasheet

Current PartRFQ

ERJ-12SF1692U

Panasonic Electronic ComponentsIn Stock: 6154ERJ-12SF1692U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DF1692U is determined by strict alignment of the following critical parameters:

• Resistance value: 16.9 kOhms
• Tolerance: ±1%
• Power rating: 0.75W
• Package type: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Termination count: 2
• Physical dimensions: 0.197" L x 0.098" W (5.00mm x 2.50mm)
• Height: 0.028" (0.70mm) maximum

The ERJ-12SF1692U qualifies as a direct substitute based on matching all electrical and mechanical parameters. Differences in product status, compliance certifications, and manufacturing series do not affect functional interchangeability in applications where the specified parameters are required.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-S1DF1692U is the preferred selection for new designs due to its active product status and ROHS3 compliance. This part meets current regulatory requirements and benefits from ongoing manufacturer support.

The ERJ-12SF1692U is electrically and mechanically equivalent but carries a "Not For New Designs" status and is RoHS non-compliant. This substitute is suitable only for legacy system maintenance, repair, or applications where RoHS compliance is not a requirement. Selection of this substitute should be limited to situations where supply of the primary part is unavailable and design constraints permit use of a non-compliant component.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12SF1692U be used as a direct replacement for ERJ-S1DF1692U in new automotive designs?

A: No. While the parts are electrically and mechanically identical, the ERJ-12SF1692U is marked "Not For New Designs" and is RoHS non-compliant. New designs must use the ERJ-S1DF1692U.

Q: Are there any physical differences between these parts that would affect PCB layout or assembly?

A: No. Both parts share identical package dimensions (2010/5025 Metric), height specifications (0.028" maximum seated height), and termination configuration. PCB footprints are interchangeable.

Q: What is the significance of the anti-sulfur feature on the ERJ-S1DF1692U?

A: The anti-sulfur protection is a material property of the ERJ-S1DF1692U that provides enhanced resistance to sulfur-containing environments. The ERJ-12SF1692U does not include this feature specification.

Q: Do both parts meet AEC-Q200 automotive qualification?

A: Yes. Both the ERJ-S1DF1692U and ERJ-12SF1692U carry AEC-Q200 qualification, indicating compliance with automotive reliability standards.

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, which indicates unlimited shelf life without moisture control requirements.

Q: Are there compliance differences that would affect component selection?

A: Yes. The ERJ-S1DF1692U is ROHS3 compliant, while the ERJ-12SF1692U is RoHS non-compliant. For applications subject to RoHS regulations, only the ERJ-S1DF1692U is acceptable.