Equivalent & Substitute Parts for ERJ-S1DF1622U

Part Overview

The ERJ-S1DF1622U is a 16.2 kOhms ±1% thick film chip resistor rated at 0.75W in a 2010 (5025 Metric) surface mount package. Manufactured by Panasonic Electronic Components, this resistor features anti-sulfur properties and automotive AEC-Q200 qualification, making it suitable for demanding automotive and industrial applications operating across -55°C to 155°C. The part is currently in active production status with 974 units in stock. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and continuity for applications where the primary part may face availability constraints or where design requirements permit functional equivalents.

Substiute Parts

ERJ-S1DF1622U

Panasonic Electronic ComponentsIn Stock: 1078ERJ-S1DF1622U Datasheet

Current PartRFQ

ERJ-12SF1622U

Panasonic Electronic ComponentsIn Stock: 9156ERJ-12SF1622U Datasheet

SimilarRFQ

AC2010FK-0716K2L

YAGEOIn Stock: 712AC2010FK-0716K2L Datasheet

SimilarRFQ

CRCW201016K2FKEF

Vishay DaleIn Stock: 8550CRCW201016K2FKEF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S1DF1622U are qualified based on strict electrical and mechanical parameter matching. All identified substitutes maintain identical specifications across the following critical parameters: 16.2 kOhms resistance value, ±1% tolerance, 0.75W power rating, 2010 (5025 Metric) package, thick film composition, ±100ppm/°C temperature coefficient, -55°C to 155°C operating temperature range, AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 moisture sensitivity rating. Physical dimensions remain consistent at 0.197" L × 0.098" W (5.00mm × 2.50mm) with maximum seated height of 0.028" to 0.026" (0.70mm to 0.65mm). All parts feature two terminations and are supplied in Tape & Reel packaging. Substitution is permissible where these parameters are met, regardless of manufacturer or series designation.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S1DF1622U (Panasonic), AC2010FK-0716K2L (YAGEO), or CRCW201016K2FKEF (Vishay Dale). All three maintain identical electrical and mechanical specifications with full AEC-Q200 automotive qualification and ROHS3 compliance.

The ERJ-12SF1622U carries a "Not For New Designs" status and should be used only in legacy applications or where existing designs require continuity. This part remains functionally equivalent but is not recommended for new product development.

Selection among active alternatives may be based on supply chain considerations, preferred supplier agreements, or inventory availability. All four parts are electrically and mechanically interchangeable within the specified parameter ranges.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S1DF1622U be directly replaced with ERJ-12SF1622U? A: Yes, from an electrical and mechanical standpoint. Both parts share identical resistance, tolerance, power rating, package, and operating specifications. However, ERJ-12SF1622U is marked "Not For New Designs," so it should be used only for legacy applications or design continuity.

Q: Are YAGEO AC2010FK-0716K2L and Vishay Dale CRCW201016K2FKEF suitable direct substitutes? A: Yes. Both parts meet all electrical and mechanical requirements of the ERJ-S1DF1622U, including 16.2 kOhms resistance, ±1% tolerance, 0.75W power rating, 2010 package, AEC-Q200 qualification, and ROHS3 compliance. Both are in active production.

Q: What are the critical parameters that determine substitutability? A: Resistance value (16.2 kOhms), tolerance (±1%), power rating (0.75W), package type (2010/5025 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and automotive qualification (AEC-Q200) must all match for direct substitution.

Q: Does package height variation affect substitutability? A: The maximum seated heights range from 0.026" to 0.028" (0.65mm to 0.70mm) across all parts. These minor variations remain within typical PCB design tolerances and do not affect substitutability for standard applications.

Q: Are all substitute parts RoHS and REACH compliant? A: Yes. All four parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the significance of MSL 1 rating? A: MSL 1 (Unlimited) indicates these parts have unlimited shelf life and require no special moisture control during storage or handling, simplifying supply chain management.