ERJ-S1DF1600U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DF1600U is a 160 Ohm ±1% 0.75W chip resistor manufactured by Panasonic Electronic Components in the 2010 (5025 Metric) package. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently active in production with 861 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive certifications align with the original component requirements.

Substiute Parts

ERJ-S1DF1600U

Panasonic Electronic ComponentsIn Stock: 936ERJ-S1DF1600U Datasheet

Current PartRFQ

AC2010FK-07160RL

YAGEOIn Stock: 4439AC2010FK-07160RL Datasheet

SimilarRFQ

RMCF2010FT160R

Stackpole Electronics IncIn Stock: 1017RMCF2010FT160R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S1DF1600U are qualified based on the following criteria:

• Identical resistance value: 160 Ohms
• Matching tolerance: ±1%
• Equivalent power rating: 0.75W (3/4W)
• Same package footprint: 2010 (5025 Metric)
• Identical composition: Thick Film
• Matching temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Equivalent RoHS compliance: ROHS3 Compliant
• Equivalent moisture sensitivity: MSL 1 (Unlimited)

All substitute parts meet these electrical and mechanical parameters, ensuring direct functional equivalence in automotive and industrial applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ERJ-S1DF1600U (Panasonic), AC2010FK-07160RL (YAGEO), and RMCF2010FT160R (Stackpole)—are active production components with identical electrical specifications and automotive AEC-Q200 certification. Selection between these parts is based on availability, supply chain requirements, and manufacturing location preferences. All parts comply with ROHS3 and maintain equivalent moisture sensitivity ratings. The AC2010FK-07160RL variant features moisture-resistant thick film composition and a marginally lower seated height of 0.026" (0.65mm) compared to 0.028" (0.70mm) for the other two variants, which may be relevant for space-constrained PCB layouts. The ERJ-S1DF1600U includes anti-sulfur coating as an additional feature. All parts are suitable for direct substitution in automotive and industrial applications operating within the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can AC2010FK-07160RL be used as a direct replacement for ERJ-S1DF1600U?

A: Yes. Both parts share identical electrical specifications (160 Ohms ±1%, 0.75W), the same 2010 (5025 Metric) package footprint, matching temperature coefficients (±100ppm/°C), and equivalent automotive AEC-Q200 certification. The primary difference is the seated height: AC2010FK-07160RL measures 0.026" (0.65mm) versus 0.028" (0.70mm) for ERJ-S1DF1600U. This variation is within standard PCB assembly tolerances and does not affect electrical performance.

Q: What is the significance of the 2010 (5025 Metric) package designation?

A: The 2010 package is a surface-mount chip resistor with dimensions of 0.197" L x 0.098" W (5.00mm x 2.50mm). All three substitute parts use this identical package, ensuring mechanical compatibility with existing PCB layouts and assembly equipment. The metric designation 5025 refers to the same physical dimensions in millimeters.

Q: Are all substitute parts suitable for automotive applications?

A: Yes. All three parts carry AEC-Q200 automotive qualification, indicating compliance with automotive industry reliability and performance standards. They are suitable for use in automotive and harsh environment applications.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: The ERJ-S1DF1600U features anti-sulfur coating, which protects against sulfur-containing atmospheric contaminants. The AC2010FK-07160RL features moisture-resistant thick film composition. Both are protective measures for different environmental conditions. Selection depends on the specific environmental exposure of the application.

Q: Can these parts be used interchangeably in production?

A: Yes, provided that PCB layout accommodates the maximum seated height of 0.028" (0.70mm). The AC2010FK-07160RL, with its 0.026" (0.65mm) seated height, is compatible with layouts designed for the taller variants. All parts meet identical electrical and compliance requirements.