ERJ-S1DF1003U Equivalent & Substitute Parts

Part Overview

The ERJ-S1DF1003U is a 100 kOhms ±1% 0.75W chip resistor in 2010 (5025 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 898 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when design flexibility is required across multiple suppliers, or when inventory optimization is needed while maintaining identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	100 kOhms
Tolerance	±1%
Power Rating	0.75W (3/4W)
Package / Case	2010 (5025 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S1DF1003U is determined by strict equivalence across the following parameters:

Resistance value: 100 kOhms
Tolerance: ±1%
Power rating: 0.75W
Package: 2010 (5025 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
RoHS compliance: ROHS3 Compliant
Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in secondary features (such as anti-sulfur coating or moisture-resistant properties) do not affect functional substitutability for applications requiring the specified base parameters.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height (Max)	Product Status	AEC-Q200	RoHS
ERJ-S1DF1003U	Panasonic	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Active	Yes	ROHS3
ERJ-12SF1003U	Panasonic	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Not For New Designs	Yes	ROHS3
AC2010FK-07100KL	YAGEO	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.026" (0.65mm)	Active	Yes	ROHS3
CRCW2010100KFKEF	Vishay Dale	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Active	Yes	ROHS3
RC2010FK-07100KL	YAGEO	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.026" (0.65mm)	Active	No	ROHS3
RMCF2010FT100K	Stackpole Electronics	100 kΩ	±1%	0.75	2010	±100ppm/°C	-55 ~ 155°C	0.028" (0.70mm)	Active	Yes	ROHS3

Engineering Selection Recommendations

All listed substitute parts are electrically and mechanically equivalent to the ERJ-S1DF1003U and meet the core specification requirements. Selection should be based on the following criteria:

For new designs: CRCW2010100KFKEF (Vishay Dale), AC2010FK-07100KL (YAGEO), and RMCF2010FT100K (Stackpole Electronics) are recommended as all three maintain active product status with full AEC-Q200 automotive qualification.

For automotive applications requiring AEC-Q200 certification: ERJ-S1DF1003U, CRCW2010100KFKEF, AC2010FK-07100KL, and RMCF2010FT100K all carry AEC-Q200 ratings. RC2010FK-07100KL does not carry AEC-Q200 certification and should not be used in applications requiring this qualification.

For legacy design support: ERJ-12SF1003U is available with high inventory (11,977 units) but carries "Not For New Designs" status. This part is suitable only for sustaining production of existing designs.

For height-constrained PCB layouts: AC2010FK-07100KL and RC2010FK-07100KL offer reduced maximum seated height of 0.026" (0.65mm) compared to 0.028" (0.70mm) for other options.

All substitute parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and operate across the full -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERJ-12SF1003U be used as a direct replacement for ERJ-S1DF1003U?

A: Yes, ERJ-12SF1003U meets all electrical and mechanical specifications. However, it carries "Not For New Designs" status and should be used only for sustaining existing production. For new designs, select from active-status alternatives.

Q: Are all substitute parts suitable for automotive applications?

A: Not all. Only ERJ-S1DF1003U, ERJ-12SF1003U, AC2010FK-07100KL, CRCW2010100KFKEF, and RMCF2010FT100K carry AEC-Q200 automotive qualification. RC2010FK-07100KL lacks this certification and is unsuitable for automotive applications requiring AEC-Q200 compliance.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating (ERJ-S1DF1003U) protects against sulfur-containing atmospheric corrosion. Moisture-resistant coating (AC2010FK-07100KL, RC2010FK-07100KL) protects against moisture ingress. Both are secondary protective features; the core electrical performance remains identical across all listed parts.

Q: Can I use RC2010FK-07100KL in place of ERJ-S1DF1003U?

A: RC2010FK-07100KL is electrically and mechanically equivalent but lacks AEC-Q200 certification. Use only in non-automotive applications or where AEC-Q200 is not required.

Q: Are there height restrictions I should consider?

A: AC2010FK-07100KL and RC2010FK-07100KL have maximum seated height of 0.026" (0.65mm), while ERJ-S1DF1003U, ERJ-12SF1003U, CRCW2010100KFKEF, and RMCF2010FT100K are 0.028" (0.70mm). Verify PCB clearance requirements before selecting height-sensitive alternatives.

Q: Which substitute has the highest inventory availability?

A: CRCW2010100KFKEF (Vishay Dale) has 65,345 units in stock, followed by RMCF2010FT100K (Stackpole Electronics) with 51,452 units. ERJ-12SF1003U has 11,977 units but is not recommended for new designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message