ERJ-S14J911U Equivalent & Substitute Parts

Part Overview

The ERJ-S14J911U is a 910 Ohm ±5% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring enhanced reliability in harsh environments. The part is currently in active production status with 676 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design flexibility permits selection from qualified alternatives meeting identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	910 Ohms
Tolerance	±5%
Power Rating	0.5W (1/2W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14J911U is determined by strict equivalence across the following critical parameters:

Resistance value: 910 Ohms
Tolerance: ±5%
Power rating: 0.5W (1/2W)
Package: 1210 (3225 Metric)
Composition: Thick Film
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
Automotive qualification: AEC-Q200
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1

All substitute parts listed meet these parameters without exception. Variations in product status, packaging format (Tape & Reel vs. Cut Tape), or secondary features (anti-sulfur coating, pulse withstanding capability) do not affect electrical or mechanical compatibility.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS3	Product Status	Packaging Format
ERJ-S14J911U	Panasonic	910 Ω	±5%	0.5	1210	±200ppm/°C	-55 ~ 155°C	Yes	Yes	Active	Tape & Reel
ERJ-14YJ911U	Panasonic	910 Ω	±5%	0.5	1210	±200ppm/°C	-55 ~ 155°C	Yes	Yes	Not For New Designs	Tape & Reel
ERJ-P14J911U	Panasonic	910 Ω	±5%	0.5	1210	±200ppm/°C	-55 ~ 155°C	Yes	Yes	Active	Tape & Reel
RMCF1210JT910R	Stackpole Electronics Inc	910 Ω	±5%	0.5	1210	±200ppm/°C	-55 ~ 155°C	Yes	Yes	Active	Cut Tape

Engineering Selection Recommendations

Primary Selection (Active Status): ERJ-S14J911U remains the specified part. When unavailable, ERJ-P14J911U and RMCF1210JT910R are direct electrical and mechanical equivalents with active product status and full AEC-Q200 compliance.

Secondary Selection (Legacy Status): ERJ-14YJ911U meets all electrical and mechanical requirements but carries "Not For New Designs" status. This part is suitable only for replacement in existing production runs or field service applications where the original specification must be maintained.

Packaging Consideration: RMCF1210JT910R is supplied in Cut Tape format rather than Tape & Reel. This affects handling and assembly processes but does not impact electrical performance or component reliability.

Compliance Verification: All substitute parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and MSL 1 moisture sensitivity rating, ensuring compatibility with automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J911U replace ERJ-S14J911U in automotive applications? A: Yes. Both parts are AEC-Q200 qualified, share identical electrical specifications (910 Ω ±5%, 0.5W), operate across -55°C to 155°C, and are packaged in 1210 (3225 Metric). The pulse withstanding feature of ERJ-P14J911U provides additional capability without affecting standard circuit operation.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel packaging is supplied on continuous carrier tape for automated assembly. Cut Tape is supplied in shorter tape segments. Both formats contain identical components; the difference is in handling and assembly process compatibility. Verify your assembly equipment specifications before selecting Cut Tape format.

Q: Why is ERJ-14YJ911U marked "Not For New Designs"? A: This designation indicates the part is in mature or declining production phase. It remains fully functional and compliant but is not recommended for new product development. Use this part only for field replacement or continuation of existing designs.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed parts carry ROHS3 Compliant status and are suitable for applications requiring RoHS compliance.

Q: Can I substitute parts between different manufacturers? A: Yes. RMCF1210JT910R (Stackpole Electronics Inc) is electrically and mechanically equivalent to all Panasonic parts listed. Cross-manufacturer substitution is valid when all electrical parameters, package specifications, and certifications match.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity? A: MSL 1 indicates the component has unlimited shelf life under standard storage conditions and requires no special moisture control during handling or storage. All listed parts share this rating.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message