ERJ-S14J300U Equivalent & Substitute Parts

Part Overview

The ERJ-S14J300U is a 30 Ohm ±5% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is currently active in production with 871 pieces in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative manufacturers, or when supply chain optimization requires sourcing from multiple qualified suppliers while maintaining identical electrical and mechanical performance.

Key Parameters

Parameter	Value
Resistance	30 Ohms
Tolerance	±5%
Power Rating	0.5W (1/2W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14J300U is determined by strict equivalence across the following parameters:

Resistance value: 30 Ohms
Tolerance: ±5%
Power rating: 0.5W (1/2W)
Package: 1210 (3225 Metric)
Composition: Thick Film
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C ~ 155°C
Automotive compliance: AEC-Q200
RoHS compliance: ROHS3 Compliant
Moisture sensitivity: MSL 1 (Unlimited)

All substitute parts listed meet these criteria. Variations in product status, inventory levels, or manufacturer-specific features (such as pulse withstanding capability) do not affect electrical or mechanical interchangeability.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS3	MSL	Product Status	Inventory (Pcs)
ERJ-S14J300U	Panasonic	30 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	1	Active	871
ERJ-14YJ300U	Panasonic	30 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	1	Not For New Designs	2482
ERJ-P14J300U	Panasonic	30 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	1	Active	15316
CRCW121030R0JNEA	Vishay Dale	30 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	1	Active	4532
RMCF1210JT30R0	Stackpole Electronics	30 Ω	±5%	0.5	1210	±200ppm/°C	-55~155°C	Yes	Yes	1	Active	21150

Engineering Selection Recommendations

All listed substitute parts are electrically and mechanically equivalent to the ERJ-S14J300U and are qualified for direct substitution in automotive applications requiring AEC-Q200 compliance.

For new designs, select from parts with Active product status: ERJ-S14J300U, ERJ-P14J300U, CRCW121030R0JNEA, or RMCF1210JT30R0. The ERJ-14YJ300U carries a "Not For New Designs" designation and should be used only for legacy design maintenance or existing production continuity.

Inventory availability varies across manufacturers. RMCF1210JT30R0 offers the highest stock level (21,150 pieces), while ERJ-P14J300U provides substantial availability (15,316 pieces) from Panasonic. Selection may be optimized based on supply chain requirements, lead times, and cost considerations without compromising electrical performance or compliance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14YJ300U be used in new designs? A: No. ERJ-14YJ300U carries a "Not For New Designs" status. It is suitable only for maintaining existing production or legacy designs. For new designs, use ERJ-S14J300U, ERJ-P14J300U, CRCW121030R0JNEA, or RMCF1210JT30R0.

Q: Are all substitute parts pin-compatible with the ERJ-S14J300U? A: Yes. All substitute parts use the 1210 (3225 Metric) package with identical footprint, lead spacing, and termination configuration. They are directly interchangeable on PCBs designed for the ERJ-S14J300U.

Q: Do substitute parts meet the same automotive and compliance standards? A: Yes. All substitute parts are AEC-Q200 rated, ROHS3 compliant, and carry MSL 1 (Unlimited) moisture sensitivity rating. They meet identical environmental and regulatory requirements.

Q: What is the difference between ERJ-S14J300U and ERJ-P14J300U? A: Both are Panasonic 30 Ohm ±5% 1210 resistors with identical electrical specifications and AEC-Q200 rating. ERJ-P14J300U includes pulse withstanding capability as an additional feature. Both are Active products suitable for new designs.

Q: Can I mix different manufacturers' parts in the same design? A: Yes. All listed parts meet identical electrical, mechanical, and compliance specifications. Mixing manufacturers is acceptable from a functional standpoint, though design documentation should reflect the approved part list.

Q: What is the height difference between CRCW121030R0JNEA and other parts? A: CRCW121030R0JNEA has a maximum seated height of 0.024" (0.60mm), while other parts specify 0.028" (0.70mm). Both are within typical PCB assembly tolerances for 1210 packages. Verify clearance requirements for your specific application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message