Equivalent & Substitute Parts for ERJ-S14J152U

Part Overview

The ERJ-S14J152U is a 1.5 kOhms ±5% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package. This component is rated for 0.5W power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently in active production status with 982 units in stock.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturer offerings or legacy product lines.

Substiute Parts

ERJ-S14J152U

Panasonic Electronic ComponentsIn Stock: 1009ERJ-S14J152U Datasheet

Current PartRFQ

ERJ-14YJ152U

Panasonic Electronic ComponentsIn Stock: 205418ERJ-14YJ152U Datasheet

SimilarRFQ

ERJ-P14J152U

Panasonic Electronic ComponentsIn Stock: 3002ERJ-P14J152U Datasheet

SimilarRFQ

CRCW12101K50JNEA

Vishay DaleIn Stock: 16802CRCW12101K50JNEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14J152U is determined by strict equivalence across the following parameters:

• Resistance value: 1.5 kOhms
• Tolerance: ±5%
• Power rating: 0.5W
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3

All identified substitute parts maintain these electrical and mechanical specifications. Variations in product status, inventory levels, and specific feature sets (such as anti-sulfur or pulse withstanding capabilities) do not affect substitution eligibility when core parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

For new designs, ERJ-S14J152U, ERJ-P14J152U, and CRCW12101K50JNEA are all suitable selections. All three maintain active product status and full compliance with ROHS3 and AEC-Q200 automotive standards.

ERJ-14YJ152U is electrically and mechanically equivalent but carries a "Not For New Designs" status. This part remains available for legacy system support and field replacements where existing inventory or design continuity is required.

The Vishay Dale CRCW12101K50JNEA offers an alternative from a different manufacturer while maintaining all critical electrical parameters and automotive compliance. The seated height of 0.024" (0.60mm) is slightly lower than Panasonic variants at 0.028" (0.70mm), which may be relevant for applications with strict height constraints.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14YJ152U be used in new designs? A: ERJ-14YJ152U is electrically and mechanically equivalent to ERJ-S14J152U but carries a "Not For New Designs" designation. It is suitable for legacy system support and field replacements only.

Q: What is the difference between ERJ-S14J152U and ERJ-P14J152U? A: Both parts are electrically identical with matching resistance, tolerance, power rating, and package specifications. ERJ-P14J152U includes pulse withstanding capability as an additional feature. Both are in active production status.

Q: Is CRCW12101K50JNEA a direct replacement for ERJ-S14J152U? A: CRCW12101K50JNEA is electrically and mechanically equivalent with all critical parameters matching. The primary difference is the manufacturer (Vishay Dale versus Panasonic) and a slightly lower seated height of 0.024" compared to 0.028". Both are AEC-Q200 compliant and ROHS3 compliant.

Q: Are all substitute parts suitable for automotive applications? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and are suitable for automotive circuit applications.

Q: What determines substitution eligibility for this resistor? A: Substitution is based on matching resistance value (1.5 kOhms), tolerance (±5%), power rating (0.5W), package (1210), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (AEC-Q200, ROHS3).

Q: Can I use these parts interchangeably in PCB assembly? A: Yes, all substitute parts use the same 1210 package footprint and are mechanically compatible. The slight height variation in CRCW12101K50JNEA (0.024" versus 0.028") does not affect standard PCB assembly processes.