ERJ-S14F75R0U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F75R0U is a 75 Ohm ±1% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently in active production status with 772 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design flexibility permits selection from multiple qualified manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

ERJ-S14F75R0U

Panasonic Electronic ComponentsIn Stock: 860ERJ-S14F75R0U Datasheet

Current PartRFQ

ERJ-14NF75R0U

Panasonic Electronic ComponentsIn Stock: 10557ERJ-14NF75R0U Datasheet

SimilarRFQ

AC1210FR-0775RL

YAGEOIn Stock: 15593AC1210FR-0775RL Datasheet

SimilarRFQ

CRCW121075R0FKEA

Vishay DaleIn Stock: 23052CRCW121075R0FKEA Datasheet

SimilarRFQ

RMCF1210FT75R0

Stackpole Electronics IncIn Stock: 13177RMCF1210FT75R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F75R0U is determined by strict equivalence across the following critical parameters:

• Resistance value: 75 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All substitute parts listed meet these electrical and mechanical requirements. Variations in physical dimensions (length, width, height) within the 1210 package specification, packaging format (Tape & Reel vs. Cut Tape), and product status do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are electrically and mechanically equivalent to the ERJ-S14F75R0U and meet automotive AEC-Q200 qualification requirements.

For new designs, select from parts with Active product status: AC1210FR-0775RL (YAGEO), CRCW121075R0FKEA (Vishay Dale), or RMCF1210FT75R0 (Stackpole Electronics Inc). These three options provide long-term availability and manufacturer support.

The ERJ-14NF75R0U (Panasonic) carries "Not For New Designs" status and should be used only for legacy design maintenance or when existing inventory constraints require it.

Packaging format differences (Tape & Reel versus Cut Tape) do not affect electrical performance but may influence procurement and assembly processes. The RMCF1210FT75R0 is supplied in Cut Tape format, while all other options use Tape & Reel packaging.

All parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF75R0U replace ERJ-S14F75R0U in new designs?

A: ERJ-14NF75R0U meets all electrical and mechanical specifications for functional equivalence. However, it carries "Not For New Designs" status. For new designs, use AC1210FR-0775RL, CRCW121075R0FKEA, or RMCF1210FT75R0 to ensure long-term manufacturer support and availability.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain identical components. Tape & Reel packaging is suitable for automated assembly lines with reel-fed pick-and-place equipment. Cut Tape packaging is supplied in smaller quantities on carrier tape and is typically used for manual assembly or lower-volume production. Electrical performance is identical.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this certification.

Q: Do physical dimension variations affect compatibility?

A: All parts conform to the 1210 (3225 Metric) package specification. Minor variations in length, width, and height within package tolerances do not affect PCB footprint compatibility or electrical performance.

Q: Can I mix manufacturers in the same design?

A: Yes. All substitute parts meet identical electrical specifications, tolerance, power rating, and temperature characteristics. Multiple manufacturers can be used within the same design without functional impact.

Q: What is MSL 1 rating significance?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life under standard storage conditions. No special moisture control or baking procedures are required before assembly.