ERJ-S14F61R9U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F61R9U is a 61.9 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package format. This component is rated for 0.5W power dissipation and meets AEC-Q200 automotive qualification standards with anti-sulfur construction. The part is currently in active production status. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to availability, supply chain considerations, or design flexibility within the same electrical and mechanical specifications.

Substiute Parts

ERJ-S14F61R9U

Panasonic Electronic ComponentsIn Stock: 731ERJ-S14F61R9U Datasheet

Current PartRFQ

ERJ-14NF61R9U

Panasonic Electronic ComponentsIn Stock: 10028ERJ-14NF61R9U Datasheet

SimilarRFQ

CRCW121061R9FKEA

Vishay DaleIn Stock: 4690CRCW121061R9FKEA Datasheet

SimilarRFQ

RMCF1210FT61R9

Stackpole Electronics IncIn Stock: 11001RMCF1210FT61R9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S14F61R9U are qualified based on the following criteria:

• Identical resistance value: 61.9 Ohms
• Identical tolerance: ±1%
• Identical power rating: 0.5W (1/2W)
• Identical package: 1210 (3225 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±100ppm/°C
• Identical operating temperature range: -55°C to 155°C
• Identical automotive qualification: AEC-Q200
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity: MSL 1

All substitute parts listed meet these core electrical and mechanical parameters, ensuring direct functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S14F61R9U (Panasonic), CRCW121061R9FKEA (Vishay Dale), or RMCF1210FT61R9 (Stackpole Electronics Inc). All three are actively manufactured and fully compliant with ROHS3 and AEC-Q200 requirements.

The ERJ-14NF61R9U carries a "Not For New Designs" status and should be used only for legacy design maintenance or replacement applications where existing inventory must be maintained.

All substitute parts are ROHS3 compliant and carry MSL 1 rating, indicating unlimited shelf life under standard storage conditions. Selection among active alternatives may be based on supply availability, lead time, or established supplier relationships, as electrical and mechanical performance are equivalent.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF61R9U be used as a direct replacement for ERJ-S14F61R9U?

A: Electrical and mechanical parameters are identical. However, ERJ-14NF61R9U is marked "Not For New Designs." Use only for legacy system maintenance or when existing inventory must be preserved.

Q: Are there height differences between substitute parts?

A: CRCW121061R9FKEA has a maximum seated height of 0.024" (0.60mm), while ERJ-S14F61R9U, ERJ-14NF61R9U, and RMCF1210FT61R9 are all 0.028" (0.70mm). Verify PCB layout clearance if height is a design constraint.

Q: Do all substitute parts meet automotive qualification?

A: Yes. All listed parts carry AEC-Q200 automotive qualification and are suitable for automotive applications.

Q: What is the difference between these manufacturers?

A: ERJ-S14F61R9U and ERJ-14NF61R9U are Panasonic products. CRCW121061R9FKEA is manufactured by Vishay Dale. RMCF1210FT61R9 is manufactured by Stackpole Electronics Inc. All meet identical electrical specifications and automotive standards.

Q: Are these parts RoHS compliant?

A: Yes. All parts listed are ROHS3 compliant and REACH unaffected.

Q: What does MSL 1 rating mean?

A: MSL 1 indicates unlimited shelf life. These parts do not require special moisture control during storage or handling.