ERJ-S14F6190U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F6190U is a 619 Ohms ±1% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 1112 pieces available in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple qualified manufacturers is needed while maintaining identical electrical and mechanical performance.

Substiute Parts

ERJ-S14F6190U

Panasonic Electronic ComponentsIn Stock: 1154ERJ-S14F6190U Datasheet

Current PartRFQ

ERJ-14NF6190U

Panasonic Electronic ComponentsIn Stock: 16007ERJ-14NF6190U Datasheet

SimilarRFQ

CRCW1210619RFKEA

Vishay DaleIn Stock: 15455CRCW1210619RFKEA Datasheet

SimilarRFQ

RMCF1210FT619R

Stackpole Electronics IncIn Stock: 4058RMCF1210FT619R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F6190U is determined by strict equivalence across the following critical parameters:

• Resistance value: 619 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All substitute parts listed meet these exact specifications across all electrical and mechanical parameters. Substitution is valid regardless of manufacturer or series designation, provided all parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

All four parts are electrically and mechanically equivalent and suitable for direct substitution in applications requiring 619 Ohms ±1% 0.5W 1210 package resistors with AEC-Q200 automotive qualification.

For new designs, CRCW1210619RFKEA (Vishay Dale) and RMCF1210FT619R (Stackpole) are preferred due to active product status and robust inventory levels. The CRCW1210619RFKEA offers the lowest seated height at 0.024" (0.60mm), which may provide advantages in space-constrained PCB layouts.

ERJ-14NF6190U (Panasonic) carries a "Not For New Designs" status and should be used only for legacy system maintenance or when existing design documentation specifically requires the ERJ-14N series.

ERJ-S14F6190U remains the primary specification with active status and anti-sulfur coating for enhanced corrosion resistance in harsh automotive environments.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF6190U be used as a direct replacement for ERJ-S14F6190U?

A: Yes, ERJ-14NF6190U meets all electrical and mechanical specifications for direct substitution. However, it carries "Not For New Designs" status. Use only when supply constraints require it or for legacy system support.

Q: What is the difference between CRCW1210619RFKEA and RMCF1210FT619R?

A: Both parts are electrically identical with matching resistance, tolerance, power rating, and temperature characteristics. The primary difference is seated height: CRCW1210619RFKEA is 0.024" (0.60mm) versus RMCF1210FT619R at 0.028" (0.70mm). Select based on PCB clearance requirements.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes, all listed parts carry AEC-Q200 automotive qualification and are suitable for automotive applications requiring this certification.

Q: Does the anti-sulfur feature of ERJ-S14F6190U affect substitution compatibility?

A: The anti-sulfur coating is a feature of the ERJ-S14F6190U series. Substitute parts do not explicitly list this feature but meet all other electrical and mechanical requirements. For applications where anti-sulfur protection is critical, specify ERJ-S14F6190U.

Q: What is the moisture sensitivity level for these parts?

A: All parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes, provided the PCB layout accommodates the maximum seated height of 0.028" (0.70mm). CRCW1210619RFKEA with 0.024" (0.60mm) height is compatible with all layouts designed for the standard height.