ERJ-S14F60R4U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F60R4U is a 60.4 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package format. This component is rated for 0.5W power dissipation and meets AEC-Q200 automotive qualification standards with anti-sulfur properties. The part is currently in active production status with 801 units in stock.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits equivalent alternatives from qualified manufacturers. All substitute parts listed maintain identical electrical specifications and package dimensions within acceptable tolerances.

Key Parameters

Parameter	Value
Resistance	60.4 Ohms
Tolerance	±1%
Power Rating	0.5W (1/2W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F60R4U is determined by strict equivalence across the following parameters:

Resistance value: 60.4 Ohms
Tolerance: ±1%
Power rating: 0.5W
Package: 1210 (3225 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS3 compliance
MSL 1 rating

All five substitute parts listed meet these criteria. Variations in physical dimensions (length, width, height) within the 1210 package specification, packaging format (Tape & Reel vs. Cut Tape), and optional features (anti-sulfur, moisture resistant) do not affect electrical interchangeability.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	RoHS3	MSL	Status	Inventory
ERJ-S14F60R4U	Panasonic	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Yes	1	Active	801
ERJ-14NF60R4U	Panasonic	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Yes	1	Not For New Designs	19560
AC1210FR-0760R4L	YAGEO	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Yes	1	Active	9207
CRCW121060R4FKEA	Vishay Dale	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Yes	1	Active	30565
RC1210FR-0760R4L	YAGEO	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	No	Yes	1	Active	5900
RMCF1210FT60R4	Stackpole Electronics	60.4 Ω	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Yes	1	Active	24537

Engineering Selection Recommendations

For new designs, select from parts with Active product status: AC1210FR-0760R4L (YAGEO), CRCW121060R4FKEA (Vishay Dale), RC1210FR-0760R4L (YAGEO), or RMCF1210FT60R4 (Stackpole Electronics). All four maintain full AEC-Q200 compliance and RoHS3 certification.

The ERJ-14NF60R4U (Panasonic) carries "Not For New Designs" status and should be used only for legacy system maintenance or existing production continuity where design changes are not feasible.

For automotive applications requiring AEC-Q200 qualification, prioritize AC1210FR-0760R4L, CRCW121060R4FKEA, or RMCF1210FT60R4. The RC1210FR-0760R4L lacks AEC-Q200 rating and is suitable only for non-automotive applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S14F60R4U be directly replaced with ERJ-14NF60R4U?

A: Yes, electrical and mechanical specifications are identical. However, ERJ-14NF60R4U is marked "Not For New Designs." Use only for existing production or legacy system support.

Q: Are all substitute parts suitable for automotive applications?

A: No. RC1210FR-0760R4L does not carry AEC-Q200 certification. For automotive use, select AC1210FR-0760R4L, CRCW121060R4FKEA, or RMCF1210FT60R4.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both formats contain identical components. Tape & Reel (TR) is supplied on continuous carrier tape for automated assembly. Cut Tape (CT) is supplied in shorter segments. Selection depends on assembly equipment and volume requirements.

Q: Do dimensional variations within the 1210 package affect compatibility?

A: No. All parts meet 1210 (3225 Metric) package specification. Minor variations in length, width, and height remain within acceptable PCB footprint tolerances.

Q: Which substitute offers the best availability?

A: CRCW121060R4FKEA (Vishay Dale) has the highest inventory at 30,565 units, followed by RMCF1210FT60R4 (Stackpole Electronics) at 24,537 units.

Q: Is moisture sensitivity a concern for these parts?

A: No. All parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message