ERJ-S14F5601U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F5601U is a 5.6 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package format. This component is rated for 0.5W power dissipation and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 1092 units available in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

ERJ-S14F5601U

Panasonic Electronic ComponentsIn Stock: 1157ERJ-S14F5601U Datasheet

Current PartRFQ

CRCW12105K60FKEA

Vishay DaleIn Stock: 14928CRCW12105K60FKEA Datasheet

SimilarRFQ

RC1210FR-075K6L

YAGEOIn Stock: 11273RC1210FR-075K6L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S14F5601U are qualified based on the following criteria:

Electrical Parameters: Resistance value of 5.6 kOhms, tolerance of ±1%, and power rating of 0.5W must be identical.

Mechanical Parameters: Package designation of 1210 (3225 Metric) with two terminations is required for PCB footprint compatibility.

Environmental & Compliance Parameters: Operating temperature range of -55°C to 155°C, temperature coefficient of ±100ppm/°C, RoHS3 compliance, and MSL 1 rating must be maintained.

Automotive Qualification: AEC-Q200 rating or equivalent automotive-grade certification is required for applications demanding automotive-level reliability.

The identified substitute parts meet all electrical and mechanical requirements. Variations in specific features (such as anti-sulfur versus moisture-resistant coatings) do not affect functional equivalence for standard circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active production status and full RoHS3 compliance. The ERJ-S14F5601U and CRCW12105K60FKEA both carry explicit AEC-Q200 automotive qualification, making them suitable for applications requiring automotive-grade reliability standards. The RC1210FR-075K6L from YAGEO meets all electrical and mechanical specifications but does not list AEC-Q200 certification in the provided data.

The seated height difference between the Panasonic part (0.70mm) and the Vishay Dale and YAGEO parts (0.60mm) is within typical PCB assembly tolerances for 1210 packages and does not affect functional performance. Component selection should prioritize availability, lead time, and cost considerations while maintaining compliance with application-specific requirements.

Frequently Asked Questions (FAQ)

Q: Can CRCW12105K60FKEA directly replace ERJ-S14F5601U in automotive applications?

A: Yes. Both parts share identical electrical specifications (5.6 kOhms ±1%, 0.5W), operate across the same temperature range (-55°C to 155°C), and carry AEC-Q200 automotive qualification. The 1210 package footprint is identical, ensuring PCB compatibility.

Q: What is the significance of the seated height difference between these parts?

A: The ERJ-S14F5601U has a maximum seated height of 0.70mm, while CRCW12105K60FKEA and RC1210FR-075K6L are rated at 0.60mm. This 0.10mm variation is within standard PCB assembly tolerances for 1210 components and does not affect circuit performance or board-level clearance in typical applications.

Q: Is RC1210FR-075K6L suitable for automotive applications requiring AEC-Q200?

A: The RC1210FR-075K6L meets all electrical and mechanical requirements for the 1210 package category. However, the provided specifications do not list AEC-Q200 certification. Applications with explicit automotive qualification requirements should use ERJ-S14F5601U or CRCW12105K60FKEA.

Q: Are all three parts RoHS3 compliant?

A: Yes. ERJ-S14F5601U, CRCW12105K60FKEA, and RC1210FR-075K6L are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard storage and handling conditions.

Q: What determines substitution eligibility for this resistor category?

A: Substitution is based on matching resistance value (5.6 kOhms), tolerance (±1%), power rating (0.5W), package format (1210), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Compliance certifications and specific protective features (anti-sulfur, moisture-resistant) are application-dependent but do not affect electrical equivalence.