ERJ-S14F5600U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F5600U is a 560 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package format. This component is rated for 0.5W power dissipation and features anti-sulfur properties with AEC-Q200 automotive qualification. The part is currently in active production status with 958 units available in stock.

Equivalent and substitute parts are identified when design requirements permit component interchange based on matching electrical specifications, mechanical compatibility, and environmental ratings. Substitute parts enable supply chain flexibility, alternative sourcing, and inventory optimization while maintaining circuit performance.

Substiute Parts

ERJ-S14F5600U

Panasonic Electronic ComponentsIn Stock: 1048ERJ-S14F5600U Datasheet

Current PartRFQ

RC1210FR-07560RL

YAGEOIn Stock: 9832RC1210FR-07560RL Datasheet

SimilarRFQ

RMCP1210FT560R

Stackpole Electronics IncIn Stock: 2343RMCP1210FT560R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F5600U is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 560 Ohms
• Tolerance: ±1%
• Package / Case: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1

Allowable Variation:

• Power Rating: Substitute parts may have equal or higher power ratings (0.5W or greater)
• Features: Substitute parts may have different feature sets (anti-sulfur vs. moisture resistant) provided automotive or industrial qualification is maintained

Two substitute parts meet these criteria: RC1210FR-07560RL (YAGEO) and RMCP1210FT560R (Stackpole Electronics Inc).

Parameter Comparison

Engineering Selection Recommendations

RC1210FR-07560RL (YAGEO): This substitute maintains identical electrical specifications and power rating to the primary part. YAGEO's RC_L series provides ROHS3 compliance and MSL 1 rating. The moisture-resistant feature set differs from the anti-sulfur specification of the primary part; however, both feature sets provide environmental protection suitable for general industrial applications. This part is available in higher inventory quantity (9773 units).

RMCP1210FT560R (Stackpole Electronics Inc): This substitute provides a higher power rating (0.667W vs. 0.5W), enabling use in circuits with increased thermal margin. The RMCP series maintains AEC-Q200 automotive qualification matching the primary part's automotive-grade specification. Electrical parameters, temperature coefficient, and operating range are identical. This part is suitable for automotive applications requiring enhanced power dissipation capability.

Both substitutes maintain full compliance with RoHS3 and REACH regulations. Selection between substitutes depends on application requirements: YAGEO for general industrial use with higher availability, or Stackpole for automotive applications with increased power headroom.

Frequently Asked Questions (FAQ)

Q: Can RC1210FR-07560RL be used as a direct replacement for ERJ-S14F5600U? A: Yes. Both parts share identical resistance (560 Ohms), tolerance (±1%), power rating (0.5W), package (1210), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). The primary difference is packaging format (Cut Tape & Digi-Reel® vs. Tape & Reel) and feature set (moisture resistant vs. anti-sulfur). Electrical performance is equivalent.

Q: Is RMCP1210FT560R suitable for circuits designed for ERJ-S14F5600U? A: Yes. RMCP1210FT560R is a valid substitute with all matching electrical parameters. The higher power rating (0.667W vs. 0.5W) provides additional thermal margin and does not create compatibility issues. Both parts carry AEC-Q200 automotive qualification, making RMCP1210FT560R suitable for automotive applications.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur protection prevents corrosion from sulfur-containing environments, while moisture-resistant protection guards against humidity and moisture ingress. Both are environmental protection mechanisms. Selection depends on the specific operating environment of the application.

Q: Are there packaging considerations when substituting these parts? A: Yes. ERJ-S14F5600U and RMCP1210FT560R are supplied in Tape & Reel format, while RC1210FR-07560RL is supplied in Cut Tape & Digi-Reel® format. Tape & Reel packaging is optimized for automated assembly, while Cut Tape is suitable for manual or lower-volume assembly. Verify compatibility with your assembly equipment before selection.

Q: Do all three parts meet automotive qualification requirements? A: ERJ-S14F5600U and RMCP1210FT560R both carry AEC-Q200 automotive qualification. RC1210FR-07560RL does not list AEC-Q200 certification. For automotive applications, RMCP1210FT560R is the recommended substitute.