Request Quote
(Ships tomorrow)
ERJ-S14F42R2U Equivalent & Substitute Parts
Part Overview
The ERJ-S14F42R2U is a 42.2 Ohm ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1210 (3225 Metric) package format. Rated for 0.5W power dissipation with automotive AEC-Q200 qualification and anti-sulfur coating, this component is designed for automotive and industrial applications requiring high reliability. The part is currently in active production status with 927 units in stock.
Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits equivalent alternatives from qualified manufacturers. All substitute candidates maintain identical electrical specifications and package dimensions while meeting the same automotive qualification standards.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Resistance | 42.2 Ohms |
| Tolerance | ±1% |
| Power Rating | 0.5W (1/2W) |
| Package / Case | 1210 (3225 Metric) |
| Composition | Thick Film |
| Temperature Coefficient | ±100ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| Automotive Rating | AEC-Q200 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the ERJ-S14F42R2U is determined by strict equivalence across the following parameters:
- Resistance value: 42.2 Ohms
- Tolerance: ±1%
- Power rating: 0.5W
- Package: 1210 (3225 Metric)
- Composition: Thick Film
- Temperature coefficient: ±100ppm/°C
- Operating temperature range: -55°C ~ 155°C
- Automotive qualification: AEC-Q200
- RoHS compliance: ROHS3 Compliant
- Moisture sensitivity: MSL 1
All identified substitute parts meet these criteria without exception. Substitution is valid across manufacturers provided all electrical and mechanical parameters remain within specification.
Parameter Comparison
| Parameter | ERJ-S14F42R2U (Panasonic) | ERJ-14NF42R2U (Panasonic) | CRCW121042R2FKEA (Vishay Dale) | RMCF1210FT42R2 (Stackpole) |
|---|---|---|---|---|
| Resistance | 42.2 Ohms | 42.2 Ohms | 42.2 Ohms | 42.2 Ohms |
| Tolerance | ±1% | ±1% | ±1% | ±1% |
| Power Rating | 0.5W | 0.5W | 0.5W | 0.5W |
| Package | 1210 (3225 Metric) | 1210 (3225 Metric) | 1210 (3225 Metric) | 1210 (3225 Metric) |
| Composition | Thick Film | Thick Film | Thick Film | Thick Film |
| Temperature Coefficient | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C |
| Operating Temperature | -55°C ~ 155°C | -55°C ~ 155°C | -55°C ~ 155°C | -55°C ~ 155°C |
| AEC-Q200 Rating | Yes | Yes | Yes | Yes |
| RoHS3 Compliance | Yes | Yes | Yes | Yes |
| MSL Rating | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| Product Status | Active | Not For New Designs | Active | Active |
| Current Inventory | 927 Pcs | 11224 Pcs | 9765 Pcs | 7482 Pcs |
Engineering Selection Recommendations
All substitute parts listed maintain full electrical and mechanical equivalence to the ERJ-S14F42R2U. Selection among alternatives should be based on the following factors:
Product Status Consideration: The ERJ-14NF42R2U carries a "Not For New Designs" status, making it suitable only for legacy system maintenance or existing production lines. For new designs, CRCW121042R2FKEA (Vishay Dale) and RMCF1210FT42R2 (Stackpole) are preferred as both maintain active production status.
Compliance & Certification: All candidates are ROHS3 compliant, AEC-Q200 qualified, and carry MSL 1 rating. No compliance differentiation exists among the options.
Inventory Availability: The ERJ-14NF42R2U offers the highest stock level at 11224 units, followed by CRCW121042R2FKEA at 9765 units and RMCF1210FT42R2 at 7482 units. The primary part ERJ-S14F42R2U maintains 927 units in stock.
Mechanical Dimensions: The CRCW121042R2FKEA (Vishay Dale) specifies a maximum seated height of 0.024" (0.60mm), compared to 0.028" (0.70mm) for the primary part and RMCF1210FT42R2. This dimensional difference may be relevant for applications with height constraints.
Frequently Asked Questions (FAQ)
Q: Can ERJ-14NF42R2U be used in new designs? A: ERJ-14NF42R2U carries "Not For New Designs" status. For new designs, use CRCW121042R2FKEA or RMCF1210FT42R2 instead.
Q: Are all substitute parts pin-compatible with ERJ-S14F42R2U? A: Yes. All substitute parts use the 1210 (3225 Metric) package with identical pin configuration and spacing.
Q: Do substitute parts meet automotive qualification requirements? A: Yes. All listed substitutes carry AEC-Q200 qualification, meeting automotive reliability standards.
Q: What is the significance of the height difference in CRCW121042R2FKEA? A: CRCW121042R2FKEA has a maximum seated height of 0.024" (0.60mm) versus 0.028" (0.70mm) for other parts. This may be advantageous in space-constrained PCB layouts but requires verification against board design clearances.
Q: Are all parts RoHS compliant? A: Yes. All parts listed are ROHS3 compliant with MSL 1 rating (unlimited moisture sensitivity protection).
Q: Can I mix different manufacturers in the same production run? A: Yes. All parts meet identical electrical specifications, tolerance, power rating, and automotive qualification. Cross-manufacturer substitution is electrically and mechanically valid.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts