Panasonic ERJ-S14F3600U Equivalent & Substitute Parts

Part Overview

The Panasonic ERJ-S14F3600U is a 360 Ohm ±1% thick film chip resistor rated at 0.5W (1/2W) in a 1210 (3225 Metric) package. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur protection. The part is currently in active production status.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements permit selection from qualified alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

ERJ-S14F3600U

Panasonic Electronic ComponentsIn Stock: 1155ERJ-S14F3600U Datasheet

Current PartRFQ

ERJ-14NF3600U

Panasonic Electronic ComponentsIn Stock: 11019ERJ-14NF3600U Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F3600U is determined by strict equivalence across the following parameters:

• Resistance value: 360 Ohms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package: 1210 (3225 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

The ERJ-14NF3600U from Panasonic meets all electrical and mechanical parameters required for direct substitution. This part maintains identical resistance, tolerance, power rating, package dimensions, and thermal characteristics. Both parts are qualified to AEC-Q200 automotive standards and comply with ROHS3 requirements.

Parameter Comparison

Engineering Selection Recommendations

The ERJ-S14F3600U is the preferred selection for new designs due to its active production status. The ERJ-14NF3600U is electrically and mechanically equivalent but carries a "Not For New Designs" status, indicating that Panasonic has transitioned this part to end-of-life phase.

For ongoing production and new design implementations, the ERJ-S14F3600U should be the primary component selection. The ERJ-14NF3600U may be considered only for legacy system maintenance, repair, or when supply of the primary part is unavailable and design phase permits use of non-active components.

Both parts maintain full compliance with AEC-Q200 automotive qualification and ROHS3 environmental standards, ensuring suitability for automotive applications within their specified operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF3600U be used as a direct replacement for ERJ-S14F3600U in new designs?

A: The ERJ-14NF3600U is electrically and mechanically equivalent to the ERJ-S14F3600U. However, the ERJ-14NF3600U carries a "Not For New Designs" status. New designs should specify the ERJ-S14F3600U to ensure long-term component availability and manufacturer support.

Q: Are the package dimensions identical between these parts?

A: Yes. Both the ERJ-S14F3600U and ERJ-14NF3600U use the 1210 (3225 Metric) package with identical dimensions of 0.126" L x 0.098" W (3.20mm x 2.50mm) and maximum seated height of 0.028" (0.70mm).

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both parts are qualified to AEC-Q200 automotive standards and comply with ROHS3 environmental requirements, making them suitable for automotive applications.

Q: What is the tolerance specification for these resistors?

A: Both parts have a tolerance of ±1%, ensuring precise resistance values within 3.6 Ohms of the nominal 360 Ohm specification.

Q: Are there differences in anti-sulfur protection between these parts?

A: The ERJ-S14F3600U includes explicit anti-sulfur protection in its specification. The ERJ-14NF3600U does not list this feature. This represents a functional difference that may be relevant for applications in corrosive environments.