ERJ-S14F1501U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F1501U is a 1.5 kOhms ±1% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 972 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift between active and legacy product lines, or when alternative manufacturers' components meet identical electrical and mechanical specifications for cost optimization or supply chain diversification.

Key Parameters

Parameter	Value
Resistance	1.5 kOhms
Tolerance	±1%
Power Rating	0.5W (1/2W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
Terminations	2
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution validity for the ERJ-S14F1501U is determined by strict equivalence across the following parameters:

Resistance value: 1.5 kOhms
Tolerance: ±1%
Power rating: 0.5W (1/2W)
Package: 1210 (3225 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical parameters. Variations in product status, compliance certifications, and dimensional tolerances are noted in the comparison table below.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Product Status	RoHS Status	Inventory
ERJ-S14F1501U	Panasonic	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Active	ROHS3 Compliant	972
ERJ-14NF1501U	Panasonic	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Not For New Designs	ROHS3 Compliant	41048
AC1210FR-071K5L	YAGEO	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Active	ROHS3 Compliant	10720
CRCW12101K50FKEA	Vishay Dale	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	Yes	Active	ROHS3 Compliant	20490
CRCW12101K50FKTA	Vishay Dale	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	No	Active	RoHS non-compliant	5962
RC1210FR-071K5L	YAGEO	1.5 kΩ	±1%	0.5	1210	±100ppm/°C	-55~155°C	No	Active	ROHS3 Compliant	1861

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs)

AC1210FR-071K5L (YAGEO) and CRCW12101K50FKEA (Vishay Dale) are the preferred substitutes. Both parts are in active production status, ROHS3 compliant, and carry AEC-Q200 automotive qualification. These parts provide the highest assurance of long-term availability and regulatory compliance for new design implementations.

Secondary Substitutes (Existing Inventory)

ERJ-14NF1501U (Panasonic) is electrically and mechanically equivalent but marked as "Not For New Designs." This part remains suitable for legacy system maintenance, repair, and rework applications where existing designs already incorporate this component. High inventory availability (41,048 units) supports ongoing production of established products.

Conditional Substitutes (Compliance Considerations)

CRCW12101K50FKTA (Vishay Dale) meets all electrical and mechanical parameters but is RoHS non-compliant and lacks AEC-Q200 certification. This part is suitable only for applications where RoHS compliance and automotive qualification are not required.

RC1210FR-071K5L (YAGEO) lacks AEC-Q200 certification. Selection of this part should be limited to non-automotive applications or where automotive qualification is not a design requirement.

Frequently Asked Questions (FAQ)

Q: Can ERJ-14NF1501U be used as a direct replacement for ERJ-S14F1501U in new automotive designs?

A: No. While ERJ-14NF1501U is electrically and mechanically equivalent, it is marked "Not For New Designs." For new automotive applications, use AC1210FR-071K5L or CRCW12101K50FKEA instead.

Q: What is the difference between CRCW12101K50FKEA and CRCW12101K50FKTA?

A: Both parts are electrically and mechanically identical. The primary difference is compliance status: CRCW12101K50FKEA is ROHS3 compliant and suitable for regulated applications, while CRCW12101K50FKTA is RoHS non-compliant. Select based on your application's regulatory requirements.

Q: Are all substitute parts qualified to AEC-Q200?

A: No. Only ERJ-S14F1501U, ERJ-14NF1501U, AC1210FR-071K5L, and CRCW12101K50FKEA carry AEC-Q200 qualification. RC1210FR-071K5L and CRCW12101K50FKTA do not. For automotive applications, use only AEC-Q200 qualified parts.

Q: Do dimensional variations between substitute parts affect PCB layout?

A: Dimensional variations are minimal. All parts use the 1210 (3225 Metric) package with maximum seated heights between 0.024" and 0.028". These tolerances are within standard PCB design margins and do not require layout modifications.

Q: Which substitute offers the best long-term availability?

A: AC1210FR-071K5L (YAGEO) and CRCW12101K50FKEA (Vishay Dale) are both in active production with strong inventory levels (10,720 and 20,490 units respectively) and are recommended for designs requiring long-term supply assurance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message