ERJ-S14F1000U Equivalent & Substitute Parts

Part Overview

The ERJ-S14F1000U is a 100 Ohm ±1% 0.5W thick film chip resistor in 1210 (3225 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The product is currently active in production with 708 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when alternative manufacturers are preferred for supply chain diversification, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	100 Ohms
Tolerance	±1%
Power Rating	0.5W (1/2W)
Package / Case	1210 (3225 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S14F1000U is determined by the following critical parameters:

Resistance value: 100 Ohms
Tolerance: ±1%
Power rating: 0.5W minimum (higher ratings are acceptable)
Package: 1210 (3225 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Automotive rating: AEC-Q200

Parts meeting all these criteria are electrically and mechanically interchangeable. Minor variations in physical dimensions (length, width, height) within the 1210 package specification do not affect substitutability. Parts with higher power ratings (0.667W) are acceptable substitutes as they provide additional thermal margin.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	RoHS Status	Product Status	Inventory
ERJ-S14F1000U	Panasonic	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	708
ERJ-14NF1000U	Panasonic	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Not For New Designs	34046
AC1210FR-07100RL	YAGEO	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	8368
CRCW1210100RFKEA	Vishay Dale	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	50039
CRCW1210100RFKTA	Vishay Dale	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	RoHS Non-compliant	Active	9302
ESR25JZPF1000	Rohm Semiconductor	100 Ω	±1%	0.667	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	6389
RC1210FR-07100RL	YAGEO	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	No	ROHS3	Active	5100
RMCF1210FT100R	Stackpole Electronics	100 Ω	±1%	0.5	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	52067
RMCP1210FT100R	Stackpole Electronics	100 Ω	±1%	0.667	1210	±100ppm/°C	-55 ~ 155°C	Yes	ROHS3	Active	5115

Engineering Selection Recommendations

Preferred Substitutes (Active Product Status + ROHS3 Compliant + AEC-Q200):

CRCW1210100RFKEA (Vishay Dale): Highest inventory availability (50039 units), active production status, full compliance
RMCF1210FT100R (Stackpole Electronics): High inventory (52067 units), active status, AEC-Q200 rated
AC1210FR-07100RL (YAGEO): Active status, AEC-Q200 rated, adequate inventory (8368 units)
ESR25JZPF1000 (Rohm Semiconductor): Higher power rating (0.667W) provides thermal margin, active status, AEC-Q200 rated
RMCP1210FT100R (Stackpole Electronics): Higher power rating (0.667W), active status, AEC-Q200 rated

Conditional Substitutes:

ERJ-14NF1000U (Panasonic): Same manufacturer, identical electrical specifications, but marked "Not For New Designs" — use only for legacy system maintenance or when supply constraints require it
CRCW1210100RFKTA (Vishay Dale): Meets electrical specifications but is RoHS non-compliant and REACH affected — use only in applications where RoHS compliance is not required
RC1210FR-07100RL (YAGEO): Active status and ROHS3 compliant but lacks AEC-Q200 automotive rating — suitable only for non-automotive applications

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a higher power rating (0.667W instead of 0.5W)?

A: Yes. Higher power ratings provide additional thermal margin and are electrically and mechanically compatible. ESR25JZPF1000 and RMCP1210FT100R both offer 0.667W ratings and are direct substitutes.

Q: What is the significance of the AEC-Q200 rating?

A: AEC-Q200 certification indicates the part meets automotive-grade reliability standards. For automotive applications, use only AEC-Q200 rated substitutes. RC1210FR-07100RL lacks this rating and is not suitable for automotive designs.

Q: Are there dimensional differences between substitute parts?

A: Minor variations exist within the 1210 package specification. All parts maintain the same 1210 (3225 Metric) footprint and are PCB compatible. Specific dimensions are provided in the parameter comparison table for reference.

Q: Why is ERJ-14NF1000U marked "Not For New Designs"?

A: This designation indicates the part is in mature/legacy status. While electrically identical to ERJ-S14F1000U, it should not be used in new designs. Use it only for replacement or maintenance of existing systems.

Q: Which substitute offers the best supply availability?

A: RMCF1210FT100R (Stackpole Electronics) has the highest inventory at 52067 units, followed by CRCW1210100RFKEA (Vishay Dale) at 50039 units.

Q: Can I use CRCW1210100RFKTA in my design?

A: CRCW1210100RFKTA is electrically compatible but is RoHS non-compliant and REACH affected. Use only if your application has no RoHS compliance requirements. For new designs, prefer CRCW1210100RFKEA instead.

Q: What packaging formats are available?

A: Most substitutes are supplied in Tape & Reel (TR) format. RC1210FR-07100RL and RMCF1210FT100R are available in Cut Tape (CT) & Digi-Reel format, which may affect minimum order quantities and handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message