Equivalent & Substitute Parts for ERJ-S08J823V

Part Overview

The ERJ-S08J823V is an 82 kOhms ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently in active production status with 1041 units in stock.

Substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements necessitate alternative performance characteristics such as increased power rating or different packaging formats.

Substiute Parts

ERJ-S08J823V

Panasonic Electronic ComponentsIn Stock: 1105ERJ-S08J823V Datasheet

Current PartRFQ

ERJ-8GEYJ823V

Panasonic Electronic ComponentsIn Stock: 45871ERJ-8GEYJ823V Datasheet

SimilarRFQ

ERJ-P08J823V

Panasonic Electronic ComponentsIn Stock: 14711ERJ-P08J823V Datasheet

SimilarRFQ

CRCW120682K0JNEA

Vishay DaleIn Stock: 24884CRCW120682K0JNEA Datasheet

SimilarRFQ

RMCF1206JT82K0

Stackpole Electronics IncIn Stock: 51663RMCF1206JT82K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08J823V is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 82 kOhms
• Tolerance: ±5%
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Automotive Rating: AEC-Q200
• RoHS Compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Power Rating: May be equal or greater than 0.25W
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel®
• Manufacturer: Different manufacturers permitted if all electrical and mechanical specifications match
• Product Status: Active or Not For New Designs (with design review consideration)

Substitute parts must maintain identical electrical performance within the specified tolerance and temperature range while meeting all automotive and environmental compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Direct Replacement):

CRCW120682K0JNEA (Vishay Dale) and RMCF1206JT82K0 (Stackpole Electronics Inc) are functionally equivalent to ERJ-S08J823V with identical electrical specifications, power rating, and package dimensions. Both parts maintain active production status and full AEC-Q200 automotive qualification. These parts are suitable for direct substitution in new designs and production runs.

Alternative with Enhanced Power Rating:

ERJ-P08J823V (Panasonic) provides identical electrical characteristics with increased power rating of 0.667W (2/3W) versus the original 0.25W. This part is suitable for applications requiring higher power dissipation capability while maintaining all other specifications. Packaging format differs (Cut Tape & Digi-Reel® versus Tape & Reel), requiring verification of assembly equipment compatibility.

Legacy Alternative (Design Review Required):

ERJ-8GEYJ823V (Panasonic) matches all electrical and mechanical specifications but carries "Not For New Designs" status. This part is suitable only for sustaining production of existing designs or as a temporary solution pending transition to active-status alternatives.

All substitute parts maintain ROHS3 compliance, MSL 1 moisture sensitivity rating, and identical thermal performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J823V replace ERJ-S08J823V in existing designs?

A: Yes, ERJ-P08J823V is electrically and mechanically compatible. The increased power rating (0.667W versus 0.25W) provides additional thermal margin. Verify that assembly equipment supports Cut Tape & Digi-Reel® packaging format, as the original part uses Tape & Reel format.

Q: What is the difference between Panasonic ERJ-S08J823V and ERJ-8GEYJ823V?

A: Both parts are electrically identical with matching specifications. ERJ-8GEYJ823V carries "Not For New Designs" status, indicating end-of-life trajectory. Use ERJ-S08J823V for new designs. ERJ-8GEYJ823V is acceptable for sustaining production of existing products.

Q: Are cross-manufacturer substitutes (Vishay Dale, Stackpole) qualified for automotive applications?

A: Yes. CRCW120682K0JNEA and RMCF1206JT82K0 both carry AEC-Q200 automotive qualification identical to the original part. All electrical parameters, temperature coefficients, and operating ranges match specification requirements.

Q: Does package height variation affect PCB assembly?

A: CRCW120682K0JNEA has maximum seated height of 0.024" (0.60mm) versus 0.028" (0.70mm) for ERJ-S08J823V and RMCF1206JT82K0. This 0.004" difference is within standard PCB assembly tolerances and does not affect functionality or reliability.

Q: Can these parts be used interchangeably in high-temperature automotive circuits?

A: Yes. All substitute parts maintain identical operating temperature range (-55°C ~ 155°C) and temperature coefficient (±200ppm/°C), ensuring consistent performance across the full automotive temperature spectrum.

Q: What is the significance of "Anti-Sulfur" feature in ERJ-S08J823V?

A: The anti-sulfur coating protects against sulfur-containing atmospheric contaminants common in industrial and automotive environments. Substitute parts without explicit anti-sulfur designation (ERJ-8GEYJ823V, ERJ-P08J823V, CRCW120682K0JNEA, RMCF1206JT82K0) maintain equivalent reliability through AEC-Q200 qualification, which includes environmental stress testing.