ERJ-S08J623V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J623V is a 62 kOhms ±5% 0.25W (1/4W) chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring environmental protection and reliability standards compliance.

The part is currently in active production status with 978 units in stock. Substitute parts are identified for applications requiring alternative power ratings, different product lifecycle stages, or enhanced pulse withstanding capabilities while maintaining core electrical and mechanical compatibility.

Substiute Parts

ERJ-S08J623V

Panasonic Electronic ComponentsIn Stock: 1003ERJ-S08J623V Datasheet

Current PartRFQ

ERJ-8GEYJ623V

Panasonic Electronic ComponentsIn Stock: 4852ERJ-8GEYJ623V Datasheet

SimilarRFQ

ERJ-P08J623V

Panasonic Electronic ComponentsIn Stock: 4004ERJ-P08J623V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08J623V is determined by the following mandatory parameters:

• Resistance value: 62 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

Substitutes may vary in the following parameters:

• Power Rating: 0.25W or higher ratings are acceptable
• Product Status: Active or Not For New Designs
• Features: Additional features such as anti-sulfur coating or pulse withstanding capability do not disqualify substitution

Two substitute parts meet these criteria: ERJ-8GEYJ623V and ERJ-P08J623V, both manufactured by Panasonic Electronic Components.

Parameter Comparison

Engineering Selection Recommendations

ERJ-8GEYJ623V is electrically and mechanically equivalent to the ERJ-S08J623V with identical power rating and all critical parameters. However, this part carries a "Not For New Designs" status, indicating it is in the mature or obsolescence phase of its product lifecycle. Selection of ERJ-8GEYJ623V is appropriate only for legacy system maintenance, repair, or continuation of existing production runs where design changes are not feasible.

ERJ-P08J623V is suitable for applications requiring higher power dissipation capability. The 0.667W (2/3W) power rating provides additional thermal margin compared to the 0.25W rating of the main part. This substitute maintains all other electrical and mechanical specifications, including AEC-Q200 automotive qualification and ROHS3 compliance. The addition of pulse withstanding capability makes ERJ-P08J623V suitable for circuits experiencing transient overvoltage conditions. This part is in active production status.

For new designs, ERJ-P08J623V is the preferred substitute when higher power rating or pulse withstanding performance is required. For legacy system support where the original 0.25W rating is adequate, ERJ-8GEYJ623V remains functionally compatible despite its obsolescence status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8GEYJ623V be used as a direct replacement for ERJ-S08J623V?

A: Yes, ERJ-8GEYJ623V is electrically and mechanically equivalent. Both parts share identical resistance, tolerance, power rating, package dimensions, and automotive AEC-Q200 qualification. The primary difference is product lifecycle status; ERJ-8GEYJ623V is marked "Not For New Designs." Direct substitution is possible for existing applications.

Q: What is the advantage of using ERJ-P08J623V over ERJ-S08J623V?

A: ERJ-P08J623V provides a higher power rating of 0.667W (2/3W) compared to 0.25W (1/4W) in the main part. This allows greater power dissipation and thermal margin in the same 1206 package footprint. Additionally, ERJ-P08J623V includes pulse withstanding capability for transient overvoltage protection. All other electrical parameters remain identical.

Q: Are all three parts pin-compatible and footprint-compatible?

A: Yes. All three parts use the 1206 (3216 Metric) package with identical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm) and maximum seated height of 0.028" (0.70mm). PCB footprints and assembly processes are interchangeable.

Q: Do all substitute parts maintain AEC-Q200 automotive qualification?

A: Yes. Both ERJ-8GEYJ623V and ERJ-P08J623V carry AEC-Q200 automotive qualification identical to the main part ERJ-S08J623V. All three parts are suitable for automotive applications requiring this standard.

Q: What does "Not For New Designs" mean for ERJ-8GEYJ623V?

A: "Not For New Designs" indicates the part is in the mature phase of its product lifecycle and may be subject to discontinuation. Panasonic recommends using alternative parts for new product development. However, the part remains available for existing production and maintenance applications.

Q: Are there differences in environmental protection between ERJ-S08J623V and ERJ-8GEYJ623V?

A: ERJ-S08J623V includes anti-sulfur coating as an explicit feature. ERJ-8GEYJ623V does not list this feature in its specification. Both parts meet ROHS3 compliance and operate across -55°C ~ 155°C. For applications in high-sulfur environments, ERJ-S08J623V is the specified choice.

Q: Can ERJ-P08J623V be used in circuits designed for 0.25W power rating?

A: Yes. ERJ-P08J623V with 0.667W rating can be used in applications designed for 0.25W. The higher power rating provides additional thermal margin and does not create compatibility issues. The part will operate within design specifications with reduced thermal stress.