ERJ-S08J564V 560kΩ 1206 SMD Resistor Equivalent & Substitute Parts

Part Overview

The ERJ-S08J564V is a 560 kOhms ±5% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring corrosion resistance. The part is currently active in production with 785 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings, or when alternative manufacturers' components meet identical electrical and mechanical specifications for cost optimization or supply chain flexibility.

Key Parameters

Parameter	Value
Resistance	560 kOhms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08J564V is determined by the following critical parameters:

Primary Substitution Criteria (Must Match):

Resistance value: 560 kOhms
Tolerance: ±5%
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C to 155°C
RoHS Compliance: ROHS3 Compliant
Moisture Sensitivity: MSL 1

Secondary Substitution Criteria (Flexible):

Power Rating: 0.25W minimum (higher ratings acceptable for direct substitution)
Automotive Rating: AEC-Q200 preferred but not mandatory for all applications
Manufacturer: Any qualified supplier

Substitute parts are grouped into two categories:

Category 1 - Direct Equivalents (0.25W, AEC-Q200): Parts with identical power rating and automotive qualification. These include ERJ-8GEYJ564V, CRCW1206560KJNEA, CR1206-JW-564ELF, and RMCF1206JT560K. These parts are interchangeable without circuit redesign.

Category 2 - Enhanced Substitutes (Higher Power Rating): ERJ-P08J564V offers 0.667W (2/3W) rating with pulse withstanding capability, suitable for applications requiring higher power dissipation margins.

Category 3 - Tighter Tolerance Alternative: RV1206FR-07560KL provides ±1% tolerance instead of ±5%, for applications requiring improved accuracy, though this represents a specification upgrade rather than a direct equivalent.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status	Height (Max)
ERJ-S08J564V	Panasonic	560 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028" (0.70mm)
ERJ-8GEYJ564V	Panasonic	560 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to 155°C	Yes	Not For New Designs	0.028" (0.70mm)
ERJ-P08J564V	Panasonic	560 kΩ	±5%	0.667W	1206	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028" (0.70mm)
CR1206-JW-564ELF	Bourns Inc.	560 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to 155°C	No	Active	0.030" (0.75mm)
CRCW1206560KJNEA	Vishay Dale	560 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to 155°C	Yes	Active	0.024" (0.60mm)
RMCF1206JT560K	Stackpole Electronics	560 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to 155°C	Yes	Active	0.028" (0.70mm)
RV1206FR-07560KL	YAGEO	560 kΩ	±1%	0.25W	1206	±200ppm/°C	-55°C to 155°C	Yes	Active	0.026" (0.65mm)

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): Select from CRCW1206560KJNEA (Vishay Dale), RMCF1206JT560K (Stackpole Electronics), or ERJ-P08J564V (Panasonic) when the ERJ-S08J564V is unavailable. All three maintain 560 kΩ ±5%, 0.25W rating, 1206 package, AEC-Q200 qualification, and active production status. CRCW1206560KJNEA offers the lowest profile (0.024" height), beneficial for space-constrained designs. RMCF1206JT560K and ERJ-P08J564V match the original height specification.

For Automotive Applications: Prioritize parts with AEC-Q200 certification: CRCW1206560KJNEA, RMCF1206JT560K, ERJ-P08J564V, and RV1206FR-07560KL. These parts meet automotive qualification standards required for vehicle electronics and industrial control systems.

For Enhanced Power Margin: ERJ-P08J564V provides 0.667W (2/3W) rating while maintaining all other specifications, offering increased power dissipation capability for circuits operating near thermal limits.

For Improved Tolerance Requirements: RV1206FR-07560KL delivers ±1% tolerance compared to the standard ±5%, suitable for precision analog circuits or measurement applications requiring tighter resistance accuracy.

Avoid for New Designs: ERJ-8GEYJ564V carries "Not For New Designs" status and should be used only for legacy system maintenance or repair applications.

For Non-Automotive Applications: CR1206-JW-564ELF (Bourns Inc.) is suitable when AEC-Q200 certification is not required. This part features moisture-resistant construction and maintains all electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can I use ERJ-P08J564V (0.667W) as a direct replacement for ERJ-S08J564V (0.25W)?

A: Yes. Higher power ratings are acceptable substitutes for lower power ratings in the same package and resistance value. The ERJ-P08J564V will function identically in circuits designed for 0.25W, with additional thermal margin. No circuit modification is required.

Q: What is the difference between ±5% and ±1% tolerance parts?

A: Tolerance specifies the maximum deviation from the nominal 560 kΩ value. ERJ-S08J564V (±5%) allows resistance between 532 kΩ and 588 kΩ. RV1206FR-07560KL (±1%) restricts the range to 554.4 kΩ and 565.6 kΩ. Use ±1% parts only when circuit performance requires tighter resistance accuracy.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental specifications.

Q: Does package height variation affect PCB assembly?

A: Package height differences (0.024" to 0.030") are within standard 1206 component tolerances and do not affect PCB assembly processes. However, verify height specifications if the design has vertical space constraints or uses automated optical inspection (AOI) with tight clearance margins.

Q: Which substitute offers the best availability?

A: CRCW1206560KJNEA (Vishay Dale) has 2,558 units in stock, RMCF1206JT560K (Stackpole) has 4,432 units, and ERJ-8GEYJ564V (Panasonic) has 22,854 units. Availability varies by distributor and time. Consult current inventory for procurement decisions.

Q: Can I use CR1206-JW-564ELF in automotive applications?

A: CR1206-JW-564ELF lacks AEC-Q200 certification. Use this part only in non-automotive applications or where automotive qualification is not a design requirement. For automotive circuits, select AEC-Q200 qualified alternatives.

Q: What does "Not For New Designs" mean for ERJ-8GEYJ564V?

A: This designation indicates the part is in mature/legacy status. Panasonic continues production for existing customer support but does not recommend it for new product development. Use only for repair, maintenance, or legacy system updates.

Q: Are all substitute parts suitable for -55°C to 155°C operating range?

A: Yes. All listed substitute parts maintain the identical -55°C to 155°C operating temperature range and ±200ppm/°C temperature coefficient, ensuring consistent performance across the full temperature spectrum.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message