ERJ-S08J511V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J511V is a 510 Ohm ±5% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring enhanced reliability in harsh environments. The product is currently active and available in high volume. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and automotive qualification requirements.

Key Parameters

Parameter	Value
Resistance	510 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08J511V are grouped based on the following critical parameters that determine functional equivalence:

Primary Matching Criteria:

Resistance value: 510 Ohms
Tolerance: ±5%
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature: -55°C ~ 155°C
RoHS3 Compliance
MSL Rating: 1 (Unlimited)

Secondary Consideration:

Power rating may vary (0.25W, 0.5W, 0.667W, or 0.75W) while maintaining the same package footprint. Higher power ratings are backward compatible for applications requiring the base 0.25W specification.
Automotive AEC-Q200 qualification is maintained across all listed substitutes.

Substitutes are organized by power rating category to facilitate selection based on application thermal requirements.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	Product Status	Height Max (mm)
ERJ-S08J511V	Panasonic	510Ω	±5%	0.25	1206	±200ppm/°C	-55~155	Yes	Active	0.70
ERJ-8GEYJ511V	Panasonic	510Ω	±5%	0.25	1206	±200ppm/°C	-55~155	Yes	Not For New Designs	0.70
ERJ-P08J511V	Panasonic	510Ω	±5%	0.667	1206	±200ppm/°C	-55~155	Yes	Active	0.70
CR1206-JW-511ELF	Bourns Inc.	510Ω	±5%	0.25	1206	±200ppm/°C	-55~155	No	Active	0.75
CRCW1206510RJNEA	Vishay Dale	510Ω	±5%	0.25	1206	±200ppm/°C	-55~155	Yes	Active	0.60
CRCW1206510RJNEAHP	Vishay Dale	510Ω	±5%	0.75	1206	±200ppm/°C	-55~155	Yes	Active	0.65
ESR18EZPJ511	Rohm Semiconductor	510Ω	±5%	0.5	1206	±200ppm/°C	-55~155	Yes	Active	0.65
RMCF1206JT510R	Stackpole Electronics Inc	510Ω	±5%	0.25	1206	±200ppm/°C	-55~155	Yes	Active	0.70

Engineering Selection Recommendations

Direct Equivalents (0.25W, Active Status, AEC-Q200): RMCF1206JT510R (Stackpole Electronics Inc) and CRCW1206510RJNEA (Vishay Dale) are functionally equivalent to ERJ-S08J511V with identical electrical specifications and active product status. Both maintain AEC-Q200 automotive qualification and ROHS3 compliance. RMCF1206JT510R offers the highest inventory availability (269,523 pcs).

Higher Power Rating Alternatives (Active Status, AEC-Q200): ERJ-P08J511V (0.667W) and CRCW1206510RJNEAHP (0.75W) provide increased power dissipation capability within the same 1206 package footprint. These are suitable for applications requiring thermal margin beyond the base 0.25W specification. Both maintain active product status and AEC-Q200 qualification.

Mid-Range Power Alternative (Active Status, AEC-Q200): ESR18EZPJ511 (0.5W) from Rohm Semiconductor offers intermediate power rating with pulse withstanding capability, suitable for applications with transient power requirements.

Avoid for New Designs: ERJ-8GEYJ511V is marked "Not For New Designs" and should not be selected for new product development despite electrical equivalence.

Non-Automotive Alternative: CR1206-JW-511ELF (Bourns Inc.) lacks AEC-Q200 qualification and is suitable only for non-automotive applications where automotive certification is not required.

Frequently Asked Questions (FAQ)

Q: Can I use a higher power rating substitute (0.5W, 0.667W, or 0.75W) in place of the 0.25W ERJ-S08J511V? A: Yes. Higher power rating resistors in the same 1206 package are backward compatible. They provide additional thermal margin and can be used in any application designed for the base 0.25W specification. Verify PCB layout accommodates the slight height variations (0.60mm to 0.75mm maximum seated height).

Q: What is the difference between ERJ-S08J511V and ERJ-8GEYJ511V? A: Both are 510Ω ±5% 0.25W 1206 resistors from Panasonic with identical electrical specifications. ERJ-8GEYJ511V is marked "Not For New Designs" and should be avoided for new product development. ERJ-S08J511V is the active replacement.

Q: Are all substitute parts AEC-Q200 qualified? A: No. CR1206-JW-511ELF (Bourns) does not carry AEC-Q200 qualification. All other listed substitutes maintain AEC-Q200 automotive qualification. Select AEC-Q200 qualified parts for automotive applications.

Q: Does package height variation affect PCB assembly? A: Package height ranges from 0.60mm to 0.75mm maximum seated height across substitutes. Verify your PCB design accommodates this tolerance band. Most modern pick-and-place equipment handles this variation without adjustment.

Q: Can I substitute the ERJ-S08J511V with CR1206-JW-511ELF? A: Only if your application does not require automotive AEC-Q200 qualification. CR1206-JW-511ELF is electrically equivalent but lacks automotive certification. For automotive or safety-critical applications, use AEC-Q200 qualified alternatives.

Q: Which substitute offers the best inventory availability? A: RMCF1206JT510R (Stackpole Electronics Inc) with 269,523 pcs in stock, followed by ERJ-8GEYJ511V with 80,171 pcs (not recommended for new designs).

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original ERJ-S08J511V specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message