ERJ-S08J474V 470kΩ 1206 Chip Resistor Equivalent & Substitute Parts

Part Overview

The ERJ-S08J474V is a 470 kΩ ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring corrosion resistance. The part is currently in active production status with 1074 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings, improved tolerance specifications, or when alternative manufacturers' components offer better lead times or cost optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	470 kΩ
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08J474V are grouped based on strict electrical and mechanical compatibility criteria:

Primary Substitution Criteria (Mandatory Match):

Resistance value: 470 kΩ
Tolerance: ±5% (or tighter tolerance acceptable)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C to 155°C minimum
RoHS3 Compliance
MSL 1 rating

Secondary Substitution Criteria (Allowable Variations):

Power Rating: 0.25W or higher (0.667W, 0.75W acceptable for higher power margin)
Automotive Rating: AEC-Q200 preferred but not mandatory for all applications
Manufacturer: Any qualified supplier meeting electrical specifications
Height variation: Within 0.030" (0.75mm) maximum seated height

Substitutes are organized by power rating category and feature set to facilitate selection based on application requirements.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Features	Temp Coeff	AEC-Q200	Product Status	Height Max (mm)
ERJ-S08J474V	Panasonic	470 kΩ	±5%	0.25	1206	Anti-Sulfur, AEC-Q200	±200ppm/°C	Yes	Active	0.70
ERJ-8GEYJ474V	Panasonic	470 kΩ	±5%	0.25	1206	AEC-Q200	±200ppm/°C	Yes	Not For New Designs	0.70
ERJ-P08J474V	Panasonic	470 kΩ	±5%	0.667	1206	AEC-Q200, Pulse Withstanding	±200ppm/°C	Yes	Active	0.70
CR1206-JW-474ELF	Bourns Inc.	470 kΩ	±5%	0.25	1206	Moisture Resistant	±200ppm/°C	No	Active	0.75
CRCW1206470KJNEA	Vishay Dale	470 kΩ	±5%	0.25	1206	AEC-Q200	±200ppm/°C	Yes	Active	0.60
CRCW1206470KJNEAHP	Vishay Dale	470 kΩ	±5%	0.75	1206	AEC-Q200, Pulse Withstanding	±200ppm/°C	Yes	Active	0.65
KTR18EZPJ474	Rohm Semiconductor	470 kΩ	±5%	0.25	1206	AEC-Q200, High Voltage	±200ppm/°C	Yes	Active	0.65
RMCF1206JG470K	Stackpole Electronics	470 kΩ	±5%	0.25	1206	AEC-Q200	±200ppm/°C	Yes	Active	0.70
RMCF1206JT470K	Stackpole Electronics	470 kΩ	±5%	0.25	1206	AEC-Q200	±200ppm/°C	Yes	Active	0.70
RV1206FR-07470KL	YAGEO	470 kΩ	±1%	0.25	1206	AEC-Q200, High Voltage	±200ppm/°C	Yes	Active	0.65
RV1206JR-07470KL	YAGEO	470 kΩ	±5%	0.25	1206	AEC-Q200, High Voltage	±200ppm/°C	Yes	Active	0.65

Engineering Selection Recommendations

Direct Equivalents (0.25W, ±5% Tolerance, AEC-Q200):

CRCW1206470KJNEA (Vishay Dale), RMCF1206JG470K (Stackpole Electronics), RMCF1206JT470K (Stackpole Electronics), RV1206JR-07470KL (YAGEO), and KTR18EZPJ474 (Rohm Semiconductor) are functionally equivalent to the ERJ-S08J474V. All maintain active production status, AEC-Q200 automotive qualification, and identical electrical specifications. These parts are suitable for direct substitution in automotive and industrial applications.

Higher Power Rating Alternatives (0.667W or 0.75W):

ERJ-P08J474V (Panasonic, 0.667W) and CRCW1206470KJNEAHP (Vishay Dale, 0.75W) provide increased power dissipation capability while maintaining all other electrical parameters. These are applicable when circuit design requires higher thermal margin or pulse withstanding capability.

Improved Tolerance Option:

RV1206FR-07470KL (YAGEO, ±1% tolerance) offers tighter tolerance specification than the ±5% requirement. This part is suitable for applications demanding higher precision while maintaining all other compatibility criteria.

Non-Automotive Alternative:

CR1206-JW-474ELF (Bourns Inc.) lacks AEC-Q200 qualification but meets all electrical and mechanical specifications. This part is suitable for non-automotive applications where automotive qualification is not required.

Obsolescence Consideration:

ERJ-8GEYJ474V (Panasonic) carries "Not For New Designs" status and should be avoided for new product development despite electrical equivalence.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S08J474V with a higher power rating resistor like ERJ-P08J474V?

A: Yes. Higher power rating resistors (0.667W or 0.75W) are acceptable substitutes provided all other parameters match: 470 kΩ resistance, ±5% tolerance, 1206 package, -55°C to 155°C operating range, and ±200ppm/°C temperature coefficient. Higher power ratings provide additional thermal margin without affecting circuit function.

Q: What is the difference between RMCF1206JG470K and RMCF1206JT470K?

A: Both parts are electrically and mechanically identical 470 kΩ ±5% 0.25W 1206 resistors from Stackpole Electronics with AEC-Q200 qualification. The difference lies in packaging designation (JG vs. JT), which reflects internal manufacturing or distribution variants. Both are suitable for direct substitution.

Q: Can I use RV1206FR-07470KL (±1% tolerance) instead of ERJ-S08J474V (±5% tolerance)?

A: Yes. Tighter tolerance specifications are acceptable substitutes. The ±1% tolerance of RV1206FR-07470KL exceeds the ±5% requirement of the original part, making it suitable for applications requiring higher precision without compromising compatibility.

Q: Is AEC-Q200 qualification mandatory for all substitute parts?

A: AEC-Q200 qualification is specified for the ERJ-S08J474V and is recommended for automotive applications. Substitute parts with AEC-Q200 rating (CRCW1206470KJNEA, RMCF1206JG470K, RMCF1206JT470K, RV1206JR-07470KL, KTR18EZPJ474, RV1206FR-07470KL) are preferred. CR1206-JW-474ELF lacks this qualification and is suitable only for non-automotive applications.

Q: What does "Not For New Designs" mean for ERJ-8GEYJ474V?

A: This status indicates the part is in mature or declining production phase. While electrically equivalent, Panasonic recommends using alternative parts for new product designs. ERJ-S08J474V (active status) or other active-status equivalents are preferred for new development.

Q: Are there height differences between substitute parts that affect PCB layout?

A: Yes. Seated height varies slightly: ERJ-S08J474V and RMCF series are 0.70mm, CRCW1206470KJNEA is 0.60mm, CRCW1206470KJNEAHP and KTR18EZPJ474 are 0.65mm, RV series are 0.65mm, and CR1206-JW-474ELF is 0.75mm. These variations are within typical PCB assembly tolerances but should be verified if height-constrained applications exist.

Q: Can I mix different manufacturers' parts in the same circuit board?

A: Yes. All listed substitute parts meet identical electrical specifications (470 kΩ ±5%, 0.25W minimum, 1206 package, -55°C to 155°C, ±200ppm/°C). Mixing manufacturers is acceptable from an electrical standpoint, though design documentation should reflect the approved part list for traceability and supply chain management.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message