ERJ-S08J430V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J430V is a 43 Ohm ±5% 0.25W (1/4W) chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring reliable performance across -55°C to 155°C operating temperature range. The part is currently in active production status with 773 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings, or when alternative manufacturers' components offer improved lead times or cost optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	43 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08J430V is determined by the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 43 Ohms
Tolerance: ±5%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C to 155°C
Automotive Rating: AEC-Q200
RoHS Compliance: ROHS3 Compliant
Moisture Sensitivity Level: MSL 1

Flexible Parameter (Power Rating):

Power rating may be equal to or greater than 0.25W. Parts with higher power ratings (0.5W, 0.667W) are acceptable substitutes as they provide equal or superior performance capability in the same package footprint.

Substitute parts are grouped into two categories based on power rating alignment:

Category A - Direct Equivalents (0.25W Power Rating): CRCW120643R0JNEA (Vishay Dale), RMCF1206JT43R0 (Stackpole Electronics Inc)

Category B - Higher Power Rating Substitutes (0.5W or 0.667W): ESR18EZPJ430 (Rohm Semiconductor, 0.5W), ERJ-P08J430V (Panasonic Electronic Components, 0.667W)

Category C - Legacy / Superseded Parts: ERJ-8GEYJ430V (Panasonic Electronic Components, Not For New Designs status)

Parameter Comparison

Parameter	ERJ-S08J430V	ERJ-8GEYJ430V	ERJ-P08J430V	CRCW120643R0JNEA	ESR18EZPJ430	RMCF1206JT43R0
Manufacturer	Panasonic	Panasonic	Panasonic	Vishay Dale	Rohm Semiconductor	Stackpole Electronics
Resistance	43 Ohms	43 Ohms	43 Ohms	43 Ohms	43 Ohms	43 Ohms
Tolerance	±5%	±5%	±5%	±5%	±5%	±5%
Power Rating	0.25W	0.25W	0.667W	0.25W	0.5W	0.25W
Package	1206	1206	1206	1206	1206	1206
Composition	Thick Film	Thick Film	Thick Film	Thick Film	Thick Film	Thick Film
Temperature Coefficient	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C	±200ppm/°C
Operating Temperature	-55°C to 155°C	-55°C to 155°C	-55°C to 155°C	-55°C to 155°C	-55°C to 155°C	-55°C to 155°C
AEC-Q200 Rating	Yes	Yes	Yes	Yes	Yes	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	MSL 1	MSL 1	MSL 1	MSL 1	MSL 1	MSL 1
Product Status	Active	Not For New Designs	Active	Active	Active	Active
Height - Seated (Max)	0.028" (0.70mm)	0.028" (0.70mm)	0.028" (0.70mm)	0.024" (0.60mm)	0.026" (0.65mm)	0.028" (0.70mm)

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): CRCW120643R0JNEA and RMCF1206JT43R0 are direct equivalents to ERJ-S08J430V. Both maintain identical electrical parameters, power rating, and package dimensions. Selection between these options depends on supplier availability and lead time requirements. All three parts carry active production status and full ROHS3 compliance with AEC-Q200 automotive qualification.

For Enhanced Power Margin Applications: ESR18EZPJ430 (0.5W) and ERJ-P08J430V (0.667W) provide higher power dissipation capability within the same 1206 package footprint. These substitutes are appropriate when circuit design allows for higher power rating components or when thermal margin improvement is beneficial. Both maintain identical resistance, tolerance, temperature coefficient, and operating temperature specifications. ERJ-P08J430V additionally features pulse withstanding capability.

For Legacy System Maintenance Only: ERJ-8GEYJ430V carries "Not For New Designs" product status and should be used only for repair or maintenance of existing systems where this specific part number is already in production. For new designs, select from active status alternatives.

Compliance Verification: All substitute parts listed maintain ROHS3 compliance, AEC-Q200 automotive qualification, and MSL 1 moisture sensitivity rating, ensuring compatibility with automotive and industrial applications requiring these certifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J430V (0.667W) be used as a direct replacement for ERJ-S08J430V (0.25W)?

A: Yes. The higher power rating of ERJ-P08J430V provides equal or superior performance in circuits designed for 0.25W operation. The component occupies the same 1206 package footprint and maintains all other electrical parameters. This substitution is appropriate when the circuit can accommodate the slightly different height profile (0.028" maximum seated height for both parts).

Q: What is the difference between CRCW120643R0JNEA and RMCF1206JT43R0?

A: Both are direct equivalents with identical electrical specifications and 0.25W power rating. The primary difference is manufacturer: CRCW120643R0JNEA is manufactured by Vishay Dale, while RMCF1206JT43R0 is manufactured by Stackpole Electronics Inc. Selection depends on supplier availability and procurement preferences. CRCW120643R0JNEA has a maximum seated height of 0.024" (0.60mm) compared to 0.028" (0.70mm) for RMCF1206JT43R0, which may be relevant for space-constrained PCB layouts.

Q: Why is ERJ-8GEYJ430V marked "Not For New Designs"?

A: ERJ-8GEYJ430V is a legacy part number from Panasonic's older ERJ-8G series. While electrically equivalent, Panasonic has superseded this part with the ERJ-S08J430V (ERJ-S08 series). New designs should specify ERJ-S08J430V or other active status alternatives to ensure long-term availability and supply chain stability.

Q: Are all substitute parts suitable for automotive applications?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and ROHS3 compliance, meeting automotive industry reliability and environmental standards. They are suitable for automotive and industrial applications requiring these certifications.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry this rating, meaning they can be stored and handled under standard conditions without special moisture control procedures, simplifying inventory management and procurement logistics.

Q: Can I mix different manufacturers' parts in the same production run?

A: Yes. All substitute parts maintain identical electrical specifications, package dimensions, and compliance certifications. However, standard engineering practice recommends documenting any manufacturer changes in design records and performing appropriate qualification testing if required by your quality or procurement procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message